Mando Copy DupliClon Alpha Universal Remote Control For domotic Doors

The universal remote control for home automation doors of MandoCopy integrates four doors home automation controls only 1 without any need for additional computers or devices.


Features:

- Compatible with more than 2,800 original remote control models.
- From more than 160 different brands (duly cataloged).
- Valid for making 90% of the duplicates.
- Integration of 4 different controls only in ONE.
- Very high performance, very high format / code capacity.
- Rolling code formats and fixed codes, integrated in the same remote control.
- Equipped with the advanced automatic registration system on the receiver.
- Comfortable and very fast (8s), proximity duplication operation.
- Multifrequency, a different frequency for each button.
- Wide working band from 433Mc to 868Mc.

Duplication process:
- Place the remote to duplicate in front of the universal duplicator remote between 2 and 5 centimeters approx. (depending on the model).
- Press and hold the upper left button of the universal duplicator remote. ´´Without releasing it´´ press the upper right button 4 times.
- Release both buttons, see that the led of the universal duplicator remote flashes slowly.
- Next, hold down the button that we want to record from the original remote control until the led of the universal duplicator remote is fixed or directly flashing rapidly, release the button of the original.
- While the led of the universal duplicator remote is flashing rapidly, press the button where we want to store the code. The led will turn off. The duplicate will have been completed successfully.

- Note: If the led blinks only three times and turns off, the code has not been recorded correctly. Repeat the operation from point 1. To record the rest of the buttons on the universal duplicator remote, repeat the process for each button. The universal duplicator keyfob can have up to four different keyfobs engraved, one per button.

Automatic registration on the receiver:
- The automatic registration system will work as long as it is not deactivated in the receiver. As long as the memory is not full, or the receiver is not locked.
- Important: do not make the duplicate near the receiver, or use the original remote until the automatic registration in the receiver has been carried out.
- Procedure: stand in front of the garage door, with the universal duplicator remote already programmed. Hold down the remote control button, which you want to register, until the led starts to flash (10s approx.), Release at this time and keep it in the same position. When the led stops flashing, the new remote control is registered.


Technical specifications:

- 4-channel, self-learning transmitter. Frequency of 433mc - 868mc.
- Battery change: loosen the rear screw and open it, remove it from the clip and place the new one the same.
- Power supply: Lithium battery CR2032, 3V
- Buttons: 4
- Frequency: 433.92Mc-868Mc
- Range: 40/100 meters
- Coding type: Evolutionary and fixed
- Different codes: 4 (fixed and / or evolving)
- Radiation force: -12dBm
- Operating temperature: -20 to +80 ° C


Specifications:

- Iot: Yes
- kind of product: Cameras and Alarm Systems
- Product subtype: Remote control

Welcome to our Mando copy DupliClon Alpha Universal Remote Control For domotic Doors special offer! Think in techinn when you want to renew your electronics and computers material. techinn is an online store that works together with the best national and international brands like Mando copy so that you can find everything you are looking for to enjoy your life. Check out the available products in Electricity and smarthome.