Liqui Moly Motorbike chain & brake cleaner 500ml

Special cleaner with a combination of selected solvents. For the rapid, efficient cleaning and degreasing of structural components on two-wheelers.

For cleaning chains with and without O/X-rings on two-wheelers and ATVs as well as drum and disk brake systems, their brake pads and components as well as brake calipers.

Application:
- Place a box or rag under the parts to be cleaned. Spray dirty chains with Motorbike Chain and Brake Cleaner and let it run off. After the solvents have evaporated (approx. 10 min), the chain will be clean and free of grease and ready to be coated with Motorbike Chain Lube (part no. 1508) or Motorbike Chain Spray White (part no. 1591). Do not spray onto plastics.　

Important: With painted brake calipers and components as well as plastics, check for compatibility on a hidden area before application. Do not lay rubber components in a container with Cleaning Fluid to clean them as they may be attacked.


Features:

- Absolutely free of chlorine
- Removes oil and grease-based contaminants
- Low surface tension
- Leaves no residues
- High proportion of active components
- Controlled evaporation free of residues
- Dissolves resin and tar-type residues
- Optimum penetration capacity
- Optimizes economical


Specifications:

- Container type: Can aerosol
- Container contents: 500 ml
- Language line: D-GB-E-P
- PU: 6