Revit Control H2O touring jacket

For sport street riders looking for a waterproof jacket (with ventilation) that also want the aesthetic of speed wrapped into a CE-class AA jacket, we bring you the Control H2O.

Its own vibe:
- When we created the Control H2O jacket, we had a very distinct vision. It was to be the seamless blending of both motorsport (think hard parts at the shoulders) and sportswear (think lamination around the zippers and tonal graphic prints). And unlike in the past where any item in a “family” of jackets/pants/one-pieces echoed almost identical aesthetics, we did something new. The Control H2O jacket is not a direct copy of leather series (jacket and one-piece suit) however, we took the graphics story of the ergonomic gradient shapes built out of diamonds and applied it in its own unique way on the chest panels and upper arms. This way, it’s immediately recognizable as a member of the “Control” series, but with its own fashion-focused twist.

Every(rainy)day functionality:
- For the days when the rain is coming down, you’re covered. The Control H2O jacket comes with the hydratex|Mesh G-liner construction along with a detachable thermal liner (to keep the cold away when necessary). And when the sun is out and you need to breathe a bit more, take the liner out and open the exhaust vents on the lower sleeves and upper back.


Features:

Regular fit:
- The Regular fit is designed for comfortable wear, and it’s tailored to suit different body shapes and sizes. However, it is not considered loose. It falls around the body instead of conforming to the rider´s physique.

Adjustability:
- Adjustment strap at waist
- Adjustment tab at upper arm

Pockets:
Inner pocket within thermal liner:
- The internal pocket within the thermal liner allows for additional storage and for riders to keep personal items close.
- Two slit pockets on front
- Lining: Mesh

Jeans loop:
- The loop at the back of this jacket enables you to attach it to your jeans, which prevents the jacket from creeping up no more exposed back when riding your motorbike.
- Short connection zipper

Soft edge at collar:
- For extra comfort, the inside of the collar is covered with a soft fabric.
- V-flap at cuff

Waterproofing:
Hydratex|Mesh G-liner:
- The 100% waterproof hydratex|G-liner coating is applied to the mesh inner lining of the garment. The seams are sealed for maximum waterproofness. This makes the wearing comfort optimal, while the functional properties of the G-liner construction are preserved.

Insulation:
- Detachable thermal liner
- Wind & water catcher behind front zipper

Ventilation:
- Air outlet on upper back
- Zippers on lower arms

Protection:
3D mesh protector pockets:
- Prepared for SEESOFT CE-level 2 Insert Back Protector
- The back protector pocket in this REV´IT garment is tailor-made to accommodate the SEESOFT CE-level 2 back protector insert Type RV an easy upgrade to maximize safety.
- Seesmart CE-level 1 Elbow Protectors
- Seesmart CE-level 1 Shoulder Protectors
- TPU protection at shoulder


Specifications:

Outer shell material:
High density polyester 600D:
- This fabric takes polyester yarn and weaves it with a finer polyester yarn, to create a high woven density that increases protection and abrasion-resistance.
- Polyester ripstop
- Softshell 3L

Visibility:
Laminated reflective logo on back:
- This product has a reflective logo at the back of the garment to help riders who are on the road be seen in low light, inclement weather, and at night.


Care:

- Machine wash 30°C, mild cycle
- Do not bleach
- Do not tumble dry
- Do not iron
- Do not dry clean

Warnings:
- Do not use softener
- Refer to the user manual