Dremel SC Gr Coarse/Medium Multitool Abrasive Brush

Best for cleaning and light sanding on materials like metal, glass, wood, aluminum and plastics
Available in fine, medium and coarse grades. Great to refinish furniture, clean grills, remove paint, tarnish and more

Use with SC402 or 402 Mandrel. The Dremel exclusive Easy Speedclic (SC) mechanism, makes wheel changing keyless, easy and fast: PULL - TWIST – RELEASE. It makes accessory changes 6X faster than using a standard mandrel. When using a 511S or 512S, after turning on the tool, touch the buff LIGHTLY to the material and pass over the area a few times until the material is cleaned up. A lighter touch is the best technique with this accessory. Pushing on the buff will damage it and wear it out more quickly. To extend the life of the 511S, 512S, they should not be be run in excess of 15,000 rpm.

Materials to use on and recommended speed:
- Aluminium 20.000 MAX
- Brass 20.000 MAX
- Copper 20.000 MAX
- Hardwood 20.000 MAX
- Plastic 20.000 MAX
- Softwood 20.000 MAX
- Steel 20.000 MAX

Technical details for DREMEL® EZ SpeedClic: Finishing Abrasive Buffs 180 & 280 grit (511S)
- Metal pipes
- Steel-general
- Sandwich material
- Veneered woods
- Plastic
- Brass
- Copper
- Soft Metal
- Laminates
- Softwood
- Hardwood
- Plywood
- Chipboard
- Fiberboard
- Mandrel
- RPM


Specifications:

- Shank diameter: 3,2 mm
- Working diameter: 25,0 mm
- Grit: 180 / 280
- Width: 24,0 mm
- Maximum RPM: 20.000 1/min
- Length: 24,0
- Height: 9,0