Emuca Lateral Distant For Hack Bastor

The side spacer is designed to be installed in cabinets with hinged or sliding doors in conjunction with the Hack pull-out frame. A spacer is required on the side of the cabinet where it mates with the door and is installed in the place where the guide goes.Its function is to leave a 25mm space between the frame and the side of the cabinet so that the door does not collide with the frame.

You can first install the spacer to the cabinet with Ø4x25mm screws and then join the guide with Ø6.2x13mm EURO screws. Or the spacer can be pre-mounted to the guide with clips that it incorporates, and then join the assembly to the cabinet with Ø4x40mm screws. Supplied with 1 lateral spacer and 8 EURO Ø6.2x13mm screws. It is made of plastic with a stone gray or black finish, depending on the selected model.


Features:

- Set of side spacers for installation in conjunction with the Hack pull-out frame in cabinets with hinged or sliding doors.
- A spacer is required on the side of the cabinet where it coincides with the door and is installed in the place where the guide goes. Its function is to leave a space of 25mm between the frame and the side of the cabinet so that the door does not collide with the frame.
- You can first install the spacer to the cabinet with Ø4x25mm screws and then attach the slide with EURO Ø6,2x13mm screws. Or you can pre-mount the spacer to the rail with the built-in clips, and then attach the assembly to the cabinet with Ø4x40mm screws.
- It includes 4 side spacers and 16 EURO screws Ø6,2x13mm.
- It is made of plastic with finish.


Specifications:

- Dimensions: 11 x 6 x 31
- Weight: 0.4 Kg
- Material: Plastic
- Components: 4 spacers, 16 screws EURO Ø6,2x13mm