Trendnet TI-G102I switch

Trendnet´s Industrial Gigabit L2 Managed Din-Rail Switch Series Offers Advanced Layer 2 Managed Features With Enhanced Traffic Controls To Meet The Evolving Demands Of Today´s Smb Networks. Each Industrial Layer 2 Managed Switch Is Equipped With An Ip30 Rated Metal Enclosure, Designed To Withstand A High Degree Of Vibration And Shock, While Operating Within A Wide Temperature Range Of -40° – 75° C (-40° – 167° F) For Industrial Environments. Our Industrial Layer 2 Managed Switch Models Feature Copper Gigabit Ports For High-Speed Device Connections, And Sfp Slots That Support Both 100base-Fx And 1000base-Fx Modules For Long Distance Fiber Networking Applications. These Industrial Layer 2 Managed Din-Rail Switches Provide An Intuitive Web-Based Management Interface. Each Trendnet Industrial Layer 2 Managed Switch Supports Advanced Traffic Management Controls, Troubleshooting, And Snmp Monitoring. Advanced Managed Switch Features Include Lacp To Group Ports Together To Increase Bandwidth Between Switches, Vlans For Segmenting And Isolating Virtual Lan Groups, Qos For Traffic Prioritization, Port Bandwidth Controls, And Snmp Monitoring Making Each Trendnet Industrial Layer 2 Managed Switch A Powerful Solution For Smb Networks.


Features:

Network Ports:
- Gigabit Ports For High-Speed Network Connectivity And Sfp Slots For Long Distance Fiber Applications

Traffic Management:
- Layer 2 Managed Features Include 802.1q, Mac & Port Isolation Vlan, Igmp Snooping, Per Port Bandwidth Control / 802.1p / Dscp / Queue Scheduling (Spq / Wrr), Stp / Rstp Spanning Tree, And Link Aggregation For Flexible Network Integration

Access Control:
- Managed Access Control Features Include Acls, Ip-Mac-Port Binding, Arp Inspection, 802.1x Radius, Mac Address Learning, Dhcp Snooping, And Ip Source Guard Provide The Industrial Layer 2 Managed Switches With Layered Network Access Controls

System Monitoring:
- Monitoring Features Include Snmp V1 / V2c / V3, Mib Support, Snmp Trap, Rmon Groups (1, 2, 3, 9), Smtp Alert, Syslog, Port Mirroring, And Sfp Ddmi

Din-Rail Mount:
- Ip30 Rated Metal Enclosure, Includes Din-Rail Mounting Bracket For The Industrial Layer 2 Managed Switch

Redundant Power:
- Redundant Power Inputs With Overload Current Protection (Power Supply Sold Separately)

Alarm Relay:
- Alarm Relay Output Triggered By Power Failure Of Primary And / Or Redundant Power To The Industrial Layer 2 Managed Switch

Jumbo Frame:
- Sends Larger Packets, Or Jumbo Frames (Up To 10kb), For Increased Performance From The Industrial Layer 2 Managed Switch

Wide Temperature Range:
- A Wide Operating Temperature Range Of -40° – 75° C (-40° – 167° F) Allows For Installations In Industrial Environments With Extreme Hot Or Cold Conditions

Shock And Vibration Resistant:
- Rated For Shock (En 60068-2-27), Freefall (En 60068-2-32), And Vibration (En 60068-2-6)

Grounding Point:
- Grounding Point Protects Equipment From External Electrical Surges On The Industrial Layer 2 Managed Switch


Specifications:

Standards:
- Ieee 802.1d
- Ieee 802.1p
- Ieee 802.1q
- Ieee 802.1w
- Ieee 802.1x
- Ieee 802.1ab
- Ieee 802.1ax
- Ieee 802.3u
- Ieee 802.3x
- Ieee 802.3z
- Ieee 802.3ab
- Ieee 802.3ad
- Ieee 802.3az

Device Interface:
- 8 X Gigabit Ports
- 2 X 100/1000mbps Sfp Slots
- 6-Pin Removable Terminal Block (Primary/Rps Power Inputs & Alarm Relay Output)
- Dip Switches
- Led Indicators
- Reset Button

Data Transfer Rate:
- Ethernet: 10mbps (Half-Duplex), 20mbps (Full-Duplex)
- Fast Ethernet: 100mbps (Half Duplex), 200mbps (Full Duplex)
- Gigabit Ethernet: 2000mbps (Full Duplex)

Performance:
- Switch Fabric: 20gbps
- Ram Buffer: 128mb
- Mac Address Table: 8k Entries
- Jumbo Frames: 10kb
- Forwarding Mode: Store And Forward
- Forwarding Rate: 14.88mpps (64-Byte Packet Size)

Management:
- Http Web-Based Gui
- Cli: Telnet / Sshv2
- Snmp V1, V2c, V3
- Snmp Trap (Up To 5 Receivers)
- Rmon Groups 1/2/3/9
- Device Configuration Backup & Restore, Upgrade Firmware, Reboot, And Reset To Default
- Multiple Administrative Or Read-Only User Accounts
- Enable Or Disable Power Saving Mode Per Port
- Static Mac Entries
- Lldp (Link Layer Discovery Protocol)
- Netlite Device Map
- Onvif Device Discovery
- Sntp
- Smtp Alert
- Syslog
- Port Statistics/Utilization
- Traffic Monitor
- Port Mirror: One To One, Many To One
- Storm Control: Broadcast, Multicast, Destination Lookup Failure (Min. Limit: 1pps)
- Loopback Detection
- Dhcp Relay/Option 82
- Modbus/Tcp
- Sfp Ddmi (Digital Diagnostic Monitoring Interface)

Mib:
- Mib Ii Rfc 1213
- Bridge Mib Rfc 1493
- Rmon (Group 1,2,3,9) Rfc 2819 Rfc 1757

Spanning Tree:
- Ieee 802.1d Stp (Spanning Tree Protocol)
- Ieee 802.1w Rstp (Rapid Spanning Tree Protocol)
- Bpdu Filter, Guard, And Root Guard
- Link Aggregation- Static Link Aggregation And 802.3ad Dynamic Lacp (Up To 3 Groups)

Quality Of Service (Qos):
- 802.1p Class Of Service (Cos)
- Dscp (Differentiated Services Code Point)
- Bandwidth Control Per Port
- Queue Scheduling: Strict Priority (Sp), Weighted Round Robin (Wrr), Weighted Fair Queuing (Wfq)

Vlan:
- 802.1q Tagged Vlan
- Mac-Based Vlan
- Port Isolation
- Up To 256 Vlan Groups, Id Range 1-4094

Multicast:
- Igmp Snooping V1, V2, V3
- Igmp Querier
- Igmp Fast Leave
- Up To 256 Multicast Groups
- Static Multicast Entries

Access Control:
- 802.1x Authentication (Local User Database, Radius, Guest Vlan Assignment)
- Dhcp Snooping/Screening
- Trusted Host/Ip Access List For Management Access
- Port Security/Mac Address Learning Restriction (Up To 100 Entries Per Port)
- Static/Dynamic Arp Inspection

Acl:
- Source/Destination Mac Address
- Source/Destination Ip Address
- Source Interface
- Vlan Id
- Ethertype
- Tcp/Udp Port 1-65535

Special Features:
- Netlite Device Discovery And Map Display In Gui
- Port Security: Mac Address Learning Restriction Per Port
- Dhcp Relay/Option 82 & Dhcp Server Snooping/Screening Support
- Wide Operating Temperature Range
- Redundant Power Inputs
- Alarm Relay Triggered By Power Failure
- Surge And Esd Protection

Power:
- Pwr (Primary) Terminal Input: 12 – 60v Dc
- Rps (Redundant) Terminal Input: 12 – 60v Dc
- Compatible Power Supply: Ti-M6024 (60w), Ti-S12024 (120w), Ti-S12048 (120w), And Ti-S24048 (240w) Sold Separately
- Max. Consumption: 13w

Terminal Block:
- Redundant Power Inputs, Alarm Relay Contact, 6-Pin
- Wire Range: 0.5 Mm^2 To 2.5 Mm^2
- Solid Wire (Awg): 12-26
- Stranded Wire (Awg): 12-26
- Wire Strip Length: 10-11mm

At this moment, the product Trendnet TI-G102I switch is in stock at techinn. Find out what other electronics and computers products, the brand Trendnet has at your online electronics and computers store. Make any outfit your own with this season´s selection of Switches models. At techinn we stock the latest styles and designs of Networks. Browse through our selection and find the electronics and computers item that suits your needs.