Jones Solution Wide splitboard

The ultimate all-terrain splitboard Ideal for backcountry freeriding and wilderness exploration. The Solution is the ultimate all-terrain splitboard and delivers unrivaled backcountry performance in any snow condition.

Featuring a directional freeride shape, directional rocker profile and a mid-stiff flex, the Solution is playful in soft snow, yet confidence inspiring on steep, hard snow. For better float in pow, the Solution’s tapered shape sinks the tail and the 3D Contour Base makes every turn more fluid and effortless. For added response, the Solution is built with our premium Ultra core, Flax/Basalt Power stringers and an ECO-plastic topsheet. For added edge grip and torsional board lock, the Solution features Inner/Outer Traction Tech 3.0, plus Karakoram Tip-Lock clips that lock closed, and Karakoram Ultra Clips 2.0 that are smaller and lighter than the original Ultra clip design.

3D Contour Base 3.0:
- Freeride focused 3D-base contours featuring an even balance of 7mm of spoon bevel in the nose and 7mm of spoon bevel in the tail. Spoon bevel starts at the rocker point.

Shape Tech:

Inside & outside Traction Tech 2.0:
- Like a serrated knife slicing into the snow, Traction Tech improves your edge grip by adding multiple contact points along the running length of your board.

Progressive sidecut:
At the far ends of the sidecut, the radius is incrementally increased as the edge reaches the contact point. Gradually increasing the sidecut radius towards the contact point delivers smoother turn initiation and exit as the edge tracks in and out of the snow with a less abrupt transition.

Quick Tension Tail Clip:
- Built-in climbing skin tension system using pre-cut notch that eliminates the need for a traditional skin tail clip.

Boltless Bridge:
- The Boltless Bridge eliminates split clip attachment hardware from the base of the board by re-profiling the wood core at the clips. The wood core under the clips is thicker, providing better torsional stiffness and a more powerful connection at the split clips.

Tapered shape, 12.5 mm:
- The tapered shape sinks the tail in pow for better float and quicker turns.

Profile:

Directional Rocker:
- A hybrid rocker/camber flex pattern defined by more tip rocker then tail rocker and camber between the bindings. The rockered tip floats the board’s nose and improves maneuverability while the camber underfoot provides edge hold and response. A slightly rockered tail maintains the power and stability of a traditional board but helps keep the tail catch-free initiating turns and landing switch.


Features:

Built with the finest tech and materials:
- 100% of our adult models feature high-end materials, construction technologies and sustainable manufacturing process. We accept no compromises in producing the most durable and sustainable snowboarding gear.

Base:

Wend Natural Wax:
- Jones boards are ready to shred straight out of the shop and are factory waxed with WEND natural wax.

Flip-Flop Base:
- Producing two or more base color options minimizes p-tex waste. Order may be filled with either color. Color does not vary by size.

Sintered 9900 Base:
- Made from Ultra-High Molecular Weight Polyethylene (UHMW-PE) and Carbon. This ultra-fast base is easy to repair thanks to the UHMW-PE.

Extra hardware:

Karakoram Ultra Clips 2.0 with Tip-Lock:
- Redesigned Karakoram Ultra Clips 2.0 are lighter weight, clamp tighter and have a smaller footprint than the original Ultra Clip. They are also adjustable so you can maintain even compression as your splitboard ages.

Fiber:

Triax fiberglass:
- Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.

Other features:

Factory Tuned:
- All Jones Snowboards are factory de-tuned at the tip and tail so you can go right from the shop to the mountain.

Inner thin recycled edges:
- Advancement in ski edge durability allow us to use thinner edges on splitboard inside edges to save weight. Outside edges are 2mm, inside edges are 1.5mm.

Outer oversized recycled edges:
- Advancement in ski edge durability allow us to use thinner edges on splitboard inside edges to save weight. Outside edges are 2mm, inside edges are 1.5mm.

Stainless steel reinforcement:
- Stainless steel plates are embedded into the nose and tail for improved board tip durability.

Recycled rounded ABS:
- Rounded sidewall finish that improves board durability by protecting topsheet from chipping.

Forever Flex:
- Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.

Bio Resin:
- Bio Resin is a bio-based epoxy made with 27% plant-based carbon instead of petroleum-based carbon. The organic raw materials used to make bio-resin are co-products or waste products of plant-based industrial processes. Bio-resin requires 33% less greenhouse gas emissions to produce than conventional epoxy.

Reinforcements

Sustainable Flax/Basalt Power stringers:
- Sustainable stringer made with 100% natural fibers. Basalt stringers improve torsional response and transfer power from under your feet to the tips of the board to eliminate nose and tail chatter.

Topsheet:

Textured Eco-plastic topsheet:
- Bio-plastic topsheet made from Castor beans featuring a subtle texture for added durability. This eco-material is ultralight, chip/scratch resistant and water/snow repellent (snow sticks less to topsheet).

Woodcore:

Ultra Split Core:
- Dual density premium wood core made of mostly paulownia with specially positioned poplar stringers for better durability and turn power.


Specifications:

- Board Size (cm): 159w
- Board Weight: 3,1kg / 6,82lbs
- Surface Area (dm2): 43,33
- Contact Length (cm): 107
- Effective Edge Length (cm): 118,0
- Tip Length (cm): 33,0
- Tail Length (cm): 19,0
- Waist Width (cm): 26,30
- Underfoot Width - Front Foot (cm): 27,83
- Underfoot Width - Rear Foot (cm): 27,30
- Tip Width (cm): 30,7
- Tail Width (cm): 29,5
- Sidecut (m): 8,7
- Taper (cm): 1,27
- Centered Stance (cm/in): 58 / 22,8
- Insert Pack: Splitboard Pack
- Stance Setback (cm): 2,0


Technology:

Sustainable Flax/Basalt Power stringers:
- Sustainable strength. Jones exclusive Flax / Basalt stringers are made with 100% natural fibers and help transfer power to the edges and absorb board chatter.

Premium sintered base:
- Life´s too short to ride slow bases! All our boards have hyper fast sintered bases made from super durable and wax absorbant premium P-tex. See the tech features for specific base details.

Boltless Bridge:
- Less hardware, more power. The Bolt-less Bridge eliminates split clip hardware from the base of the board and enhances split connection by re-profiling the woodcore under the clips.

Karakoram Ultra clips:
- Ultra clips are the strongest, lowest profile splitboard clips in the world. They deliver unmatched compression between board halves and they are adjustable so you can maintain even compression as your splitboard ages.

Quick tension tail clip:
- Jones exclusive climbing skin tension system that attaches to pre-cut tail notches and eliminates the need for a traditional skin tail clip.

Forever Flex:
- Forever Flex is a new manufacturing process that helps stabilise the flex and rocker of a board for its lifetime.

Sustainably made, built by the sun:
- We strive to make gear with the least carbon footprint possible. All boards built with Bio Resin, recycled sidewalls + edges and sustainably sourced woodcores + topsheets. Jones boards are also now built with 100% solar power.

Inner/Outer Traction Tech edges:
- Lock in up and down. Traction Tech on inside and outside split edges improves grip on icy skintracks or firm descents.

3D Contours Base:
- Welcome to the future. 3D Contour Bases are next-level tech that enhances glide + float and delivers unmatched turn flow and fluidity in any snow condition.

Sustainably sourced woodcore:
- All Jones woodcores are made from wood species that have been sustainably grown and harvested. See the tech features page for more details.

Triax Fiberglass:
- Multi-axis, stitched fiberglass laminate that offers a precise and responsive ride in any terrain or snow conditions.

Factory tuned, ready to shred:
- Buy it, mount it, rip it. All boards leave the factory ready to ride with de-tuned tip + tail, edges angled at 90°/0° and bases waxed with Wend natural wax.