Gre Professional Automatic Vacuum Cleaner

Answer of MARCO

Yes it is suitable. If you notice that the suction power is too high and that the appliance is stuck in the corners of the pool, just open the drain outlet a little to relieve the pressure.

Answer of MARCO

It is necessary to make adjustments to the position of the baffle and counterweights and also to verify that the number of tubes is just enough and not too many for the dimensions of the pool.

Answer of Gabriele

If the PH is correct and the filter motor has adequate power it also rises vertically on the side walls, so there should be no problems in overcoming a difference in level on the bottom.

Answer of MARCO

The slope of the pool bottom does not pose any problem, as the device climbs the walls and cleans them. What must be taken into account for correct operation is that the pump has the power recommended by the manufacturer.

Answer of Diogo

Yes, it is suitable for that size and it fits bestway. The problem is the engine, you have to make sure it is at least 0.33 hp

Answer of Gabriele

As for dimensions, I see no problems (we use it in a 6.5x3.75m sheet pool and the length of the tube supplied is adequate). More than anything else it is advisable to evaluate the power of the filter motor, as the suction efficiency depends on these models precisely on this parameter. Then check if the engine is> = 0.33 HP.