Gre RBG90 pool cleaning robot

GRE electric pool cleaners allow you to clean your pool comfortably, automatically, and efficiently. Equipped with innovative systems, GRE electric cleaners collect large debris such as leaves as well as finer particles like sand. The pool robot is the best tool to help you keep your pool clean.

Product characteristics:
- Cordless Robotic Pool Cleaner
- For flat pool floors
- Suitable for above-ground pools up to 9m length/80m²
- Autonomy: 90 min
- Power: 44.4W
- Suction power: 5 m3/h
- Charging time: 3 hours
- Battery: Lithium - 2600 mAh
- Tank capacity: 2L
- Easy start-up: just place the robot in the water and it will be ready to start cleaning
- Very easy to handle thanks to its light weight of 2.7kg

Recommendations for use:
- Only use the original charger
- Be especially careful with sharp elements under water, the filter grid of the robot cleaner can be easily damaged.
- Do not use lubricating oil, it contaminates the water.
- Water circulation can affect the robot´s movement so it is recommended to switch of the pool´s filtration system when using this cleaner.
- There may be obstacles in the pool that affect the robot´s movement, such as stairs.
- Avoid exposure to sunlight and store in a clean, dry place.
- It is important to keep the sensor clean to avoid limescale build-up or dirt accumulation.

Possible problems and solutions:
- The robot does not catch the debris: POSSIBLE CAUSES: Discharged battery - the compartment is full - the impeller is clogged or damaged
- The robot does not cover the entire pool or does not move: POSSIBLE CAUSES: The compartment is full
- The head rotates but the robot does not move: POSSIBLE CAUSES: there is an obstacle on the bottom - the bottom is not completely flat
- When plugged in the robot does not work: POSSIBLE CAUSES: There is dirt or rust around the sensor. Clean the sensor with a paper, cloth or brush