Wybot M1C pool cleaning robot

Wybot M1C is a state-of-the-art wired pool cleaning robot that combines high performance with ease of use. Thanks to the Plug & Play function, you just need to plug in the device to start cleaning immediately. You don´t have to worry about complicated setup - the M1C is ready to work in seconds.

Features:

Powerful brushless motor:
- At the heart of the robot is a 150W brushless motor, which provides longer life, quieter operation and higher efficiency compared to traditional brush motors. With this, the M1C thoroughly removes debris such as leaves, sand and sediment without leaving a mess.

Full pool coverage:
- The M1C cobot is designed to effectively clean the bottom, walls, steps and waterline. With its wall-climbing function and one-button return to the waterline, the robot easily moves around the entire pool without skipping any surface.

Precise route planning:
- The robot uses a 6-axis gyroscope and infrared sensor technology to accurately map the pool and determine the most efficient cleaning route. This saves time and energy while ensuring thorough dirt removal. The device works in round, polygonal and kidney-shaped pools.

Multiple cleaning modes to suit your needs:
- Using the dedicated mobile app, you can choose from multiple cleaning modes, matching the robot´s performance to your current needs. The full cleaning mode provides comprehensive removal of debris from the entire pool, while the ´´Water Line Only´´ mode focuses on removing deposits that accumulate along the water surface. For more precise cleaning, there are also options to clean only the bottom or only the walls of the pool, allowing for flexible management of the robot´s operation.

Advanced navigation:
- The Wybot M1C moves along optimized routes that guarantee maximum coverage of the pool surface. Thanks to advanced navigation algorithms, the robot can operate in one of several patterns: Star Path, which with a star pattern ensures thorough cleaning, or S Shape Path, ideal for even surface coverage. For more intensive cleaning, the robot uses the Cross Path route, while the Regular Path works well for everyday cleaning. Advanced H Shape Path and N Shape Path patterns are also available, ensuring precise cleaning of even hard-to-reach areas.

Smart scheduling of work cycles:
- With the scheduling function, you can plan your cleaning for the entire week by selecting a start time for each day. There are three cleaning cycles available to you: 1, 2 or 3 hours, depending on the size and dirtiness of your pool.

Full control via the app:
- Using the mobile app, you can manually control the robot to direct it to a specific spot that needs more thorough cleaning. Additional features, such as mode selection, water temperature monitoring, weekly scheduling and one-button return to water line, provide convenience and full control.

Safety of use:
- The Wybot M1C is equipped with a multi-level protection system that ensures safe use in all conditions. The device has protection against battery over-discharge, overcharging and overvoltage, which protects both the robot and the pool´s electrical system. In addition, the system protects against current overload and short circuit, ensuring safe operation even during prolonged operation.

Continuous operation without interruption:
- With 150W of power, precise pool mapping and powerful protection systems, Wybot M1C works without interruption, effectively removing dirt from the entire pool surface. No longer do you have to worry about poor cleaning results, low power or short life - the M1C is designed to meet any challenge.

Included:
- Robot
- Power box
- User manual
- Abbreviated manual
- Cable (18 m)
- Safety rope

Specifications:

- Rated input voltage: 100~240VAC, 50Hz/60Hz
- Rated output voltage: DC 28V
- Rated power: 100W
- Operating modes: Floor mode / wall mode / standard full pool mode / waterline mode
- Cable length: 18m
- Filtration volume: Approximately 15 m3/h
- Filter density: Multi-level filtration
- Max cleaning area: Up to 130 square meters
- Water resistance level: Purifier IPX8, power box IPX5
- Pool water temperature: 10-35°C
- Movement speed: 11m/min~16m/min
- Product size: 460 * 440 * 245mm
- Weight: Main body of the machine 9.5kg ± 0.1kg
- Storage conditions: 5°C-35°C, RH ≤75%