Creality Space Pi drying station

EU Plug.

Creality Space Pi Filament Dryer:

Unlock Flawless 3D Prints Elevate your 3D printing from good to exceptional with the CREALITY Space Pi Filament Dryer.

Designed for both hobbyists and professionals in the 3D printers subcategory, this essential device tackles the most common and frustrating issue in 3D printing:

filament moisture.

Say goodbye to stringing, bubbling, brittle material, and poor layer adhesion.

The Space Pi ensures your filament is in its optimal, dry condition, leading to smoother surfaces, stronger parts, and a significantly higher print success rate.

Experience a revolutionary improvement in your print quality.

The Space Pi Filament Dryer is engineered to restore and maintain the perfect printing properties of your materials.

By eliminating absorbed moisture, it prevents nozzle clogs and under-extrusion, allowing your 3D printer to perform exactly as intended.

This means less time troubleshooting failed prints and more time bringing your creative and functional designs to life with pristine detail and structural integrity.

Advanced Drying Technology and Intuitive Control At the heart of the Space Pi is its advanced PTC (Positive Temperature Coefficient) heating technology.

This system provides 360° hot-air circulation, ensuring that the entire filament spool is heated rapidly and evenly.

Unlike makeshift solutions or basic hairdryers that can cause hot spots and damage the filament, the Space Pi´s controlled environment guarantees uniform drying without compromising the material´s integrity.

Operation is effortless thanks to the intuitive 3.5-inch LCD touchscreen.

Monitor real-time temperature and humidity inside the chamber at a glance.

The device features one-key temperature settings for up to 12 different types of filament, including PLA, PETG, ABS, TPU, PA, and PC, taking the guesswork out of the drying process.

For custom materials, you can manually adjust the temperature from 45°C to 65°C and set the heating timer for anywhere from 0 to 48 hours.

Designed for the Modern Workflow The CREALITY Space Pi is more than just a dryer.

it´s an integrated part of your printing workflow.

Its sleek, futuristic design allows it to double as a filament holder during printing, feeding dry material directly to your printer´s extruder.

This is especially crucial for long prints and for use with high-speed 3D printers, where material consistency is paramount for success.

Its compatibility with a wide range of spool sizes and both 1.75mm and 2.85mm filament diameters makes it a versatile addition to any setup.

Technical Specifications:

* Product Model:

DB-03 * Heating Method:

PTC 360° Hot-Air Circulation * Temperature Control Range:

45°C - 65°C * Heating Duration Timer:

0 - 48 hours * Display:

3.5-inch LCD Touchscreen * Rated Power:

145W * Input Voltage:

110V/220V 50/60Hz * Compatible Filament Diameter:

1.75mm / 2.85mm * Compatible Spool Size:

Diameter ≤ 217mm, Width ≤ 80mm * Product Dimensions:

300x238 x 88 mm * Net Weight:

1.1 kg.