Audio Technica AT-LPW50PB turntable

EU PLUG.

The AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl.

It Features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.

The turntable includes a straight, matte-finish, carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal ½´´-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge.

Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Designed for a Higher Level of Listening:

- The AT-LPW50PB is equipped with a straight, matte-finish, carbon-fiber tonearm and comes with an AT-HS4 universal ½´´-mount headshell and a special black version of the versatile AT-VM95E Dual Moving Magnet phono cartridge.

Features:

- Fully manual, belt-drive operation with two speeds:

33-1/3 and 45 RPM.

- Motor Features a speed-sensor system to maintain accurate platter rotation speed.

- Adjustable dynamic anti-skate control.

- Professional anti-resonance, die-cast aluminum platter with rubber mat.

- AT-HS4 universal ½´´-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with.

- 0.3 x 0.7 mil elliptical stylus.

- AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

- Straight, matte-finish, carbon-fiber tonearm with hydraulically damped lift control and lockable rest.

- Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with high-gloss, piano-black finish.

- High-isolation, height-adjustable feet.

- Built-in switchable phono preamplifier for phono or line-level output.

- AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain.

- Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover Specifications:

- Type:

Belt-drive manual turntable.

- Motor:

DC servo with Active Speed Stabilization.

- Drive Method:

Belt drive.

- Speeds:

33-1/3 RPM, 45 RPM.

- Turntable Platter:

Die-cast aluminum.

- Wow and Flutter:

60dB.

- Output Level:

Pre-amp ´´PHONO´´:

4.0 mV nominal at 1 kHz, 5 cm/sec.

- Pre-amp ´´Line´´:

200 mV nominal at 1 kHz, 5 cm/sec.

- Phono Pre-Amp Gain:

35 dB nominal, RIAA equalized.

- Power Supply Requirements:

100-240 V, 50/60 Hz, 0.5 A Max.

- Dimensions With dustcover:

420.0 mm (16.54´´) W x 356.0 mm (14.02´´) D x 126.0 mm (4.96´´) H.

- Without dustcover and hinges:

420.0 mm (16.54´´) W x 356.0 mm (14.02´´) D x 114.0 mm (4.49´´) H.

- Weight:

5.56 kg (12.26 lbs.) without dust cover´.

- Accessories Included:

Dust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95E stereo cartridge 45-RPM adapter, RCA audio cable (approx.

1.0 m (3.3´)), AC adapter (approx.

1.5 m (4.9´)), Dust cover hinges.