Elegoo PLA PLA Filament

ELEGOO PLA white filament of 1.75mm on a 1kg spool compatible with FDM 3D printers.

PLA Filament.
-1.75mm.
-1kg spool.
-Compatible with FDM 3D printers - White.

The ELEGOO PLA is a 1.75 mm white filament compatible with FDM 3D printers.

It is made with high-quality PLA, a thermoplastic material widely used due to its low melting temperature, minimal deformation, and shrinkage.

It is easy to print, odorless during the printing process, and provides a smooth surface finish.

In addition, each spool weighs 1 kg and offers an accuracy of +/- 0.02 mm.

Dimensional accuracy of +/- 0.02 mm.

Thanks to its strict tolerances, the ELEGOO PLA filament ensures a consistent thickness of 1.75 mm, allowing for smoother and more stable prints.

Meanwhile, with a dimensional accuracy of +/- 0.02 mm, this filament significantly reduces nozzle jams and improves the success rate of each model.

Tangle-free spool and eco-friendly design.

To continue, the PLA filament spool has been designed through complete mechanical winding and rigorous manual inspection to ensure that the filament is neat and tangle-free.

In addition, it uses eco-friendly cardboard spools that degrade faster than plastic ones, aligning with a sustainable approach.

These spools include three holes that allow you to easily monitor the amount of filament remaining and facilitate its replacement in time.

Universal compatibility with FDM printers.

Finally, ELEGOO PLA filament is compatible with most 1.75 mm FDM 3D printers available on the market.

Thanks to its high performance and dimensional accuracy of +/- 0.02 mm, it adapts to different printer configurations, offering a hassle-free printing experience with exceptional results.

Main features ELEGOO PLA 1.75mm Filament:.

Smooth and fine finish, easy to print.

High compatibility and ideal for beginners.

Wide selection of colors.

Plant-based and biodegradable.

Technical specifications ELEGOO PLA 1.75mm Filament:.

Recommended printing configurations.

Drying before printing: 55 ± 5 °C. Printing temperature and humidity: ≤ 50 °C, ≤ 20% RH .

Nozzle temperature: 190-230 °C.

Bed temperature : 35-65 °C.

Plate type: PEI textured plate or other types of plates.

Printing speed: < 300 mm/s.

Physical properties.

Density: 1.26 g/cm³.

Melt flow index: 40.2 ± 2.5 g/10 min.

Melting temperature: 158 °C.

Vicat softening temperature: 62 °C.

Heat deflection temperature: 57 °C.

Mechanical properties.

Tensile strength.

Elongation at break.

Flexural modulus.

Flexural strength.

Impact strength.

Package contents:

1 x ELEGOO PLA Filament 1.75mm White.