Euroconnex Version 009S PCI-E Expansion Card

High-end RISER board with improved stability and security, with anti-explosion capacitors.

PCI-E expansion card from x1 to x16 via USB.

Allows an external PCI-E port to be used from the motherboard for situations where, due to weight, size, or convenience, a device cannot or should not be connected directly to the motherboard.

Ideal for using multiple external graphics cards for cryptocurrency mining, such as Bitcoins.

Powered via a 6-pin molex connector, and the pack includes a 15-pin SATA to 6-pin molex power cable.

However, it is recommended to power the board directly from the power supply. If you wish to use the SATA to molex cable, consider the power required by the graphics card installed on the RAISER board.

The molex connector supports a different power than the SATA. If the graphics card uses more power than the maximum for SATA, this could pose a fire risk as the connector could burn, damaging all components and endangering lives in case of fire.

Dimensions: 130x44 mm.

The pack includes:
- 1x RISER PCI-E 16 board.
- 1x USB to PCI-E 1 adapter.
- 1x 15-pin SATA to 6-pin molex cable.
- 1x USB 3.0 cable, 60cm