Hiditec MH12 METAL MESH PC tower case

Features:

Hiditec MH12 GLASS Mid-tower Gaming Box:
- MH12 is a robust chassis with a design that adapts to any configuration, it supports E-ATX, ATX and Micro ATX formats, so it supports any high-performance configuration as well as a powerful cooling capacity. On the top it has a high-speed USB Type-C connection in addition to USB 3.0, as well as the lighting selector.

Sober and elegant design:
- MH12 is a robust chassis with a design that adapts to any configuration, supporting E-ATX, ATX and Micro ATX formats so it supports any high-performance configuration in addition to a powerful cooling capacity.
- Compatible with large format graphics cards up to 330mm and coolers with a maximum height of 160mm.

Front panel with USB Type-C:
- The design of the front panel with the side openings makes it much more efficient and greatly helps to maintain an optimal temperature inside the equipment.
- At the top it has a high-speed USB Type-C connection in addition to USB 3.0, as well as the lighting selector.

Professional cooling system:
- MH12 is equipped with a cooling system and enough expandability to keep any professional setup at an optimal temperature.
- It comes standard with four ARGB fans controlled by an internal controller that can be synchronized with the motherboard and in turn with the entire setup. You can also install up to eight fans in the chassis to fully adapt to the needs of any configuration.
- If you prefer liquid cooling, it supports 360mm at the front, 260mm at the top and 120mm at the back.
- It has dust filters to keep the interior of the equipment clean and more efficient.

Higher capacity:
- Designed to mount high-performance configurations, thanks to its spacious interior and 27mm cable management system, allowing for an orderly and efficient installation.
- It supports the installation of E-ATX, ATX, Micro ATX and ITX motherboards as well as large-format graphics cards up to 330mm and coolers with a maximum height of 160mm.
- Its storage capacity is modular and can be adapted to each configuration, allowing up to four SSD units and two HDD units to be installed inside the chassis.


Specifications:

- Dimensions: 395 x 210 x 475 mm
- Weight: 6000 grs
- Liquid cooling compatible: Yes
- Form factor: E-ATX
- Front of chassis: Microperforated
- Chassis sides: Tempered glass - SECC
- Chassis power supply: ATX
- Motherboard: E-ATX - ATX - Micro ATX - ITX
- Front I/O ports: 1 x USB 3.1 Type C, 1 x USB 3.0, 1 x USB 2.0, 1 x Audio in/out
- 3.5´´ bays: 2
- 2.5´´ bays: 4
- PCI: 7
- Front fans: 3 x 120mm ARGB LEDs
- Top fans: 2 x 120mm (Optional)
- Rear fan: 1 x 120mm ARGB LED
- Side fans: 1 x 120mm (Optional)
- Bottom fans: 2 x 120mm (Optional)
- CPU Cooler Max Height: 160 mm
- Maximum GPU length: 330 mm
- Dust filters: Yes
- Fan connection: 4pin 12v connector + 3pin 5v ARGB connector
- Certificates: CE, FCC, RoHS
- Radiator support: Front: 360mm / 240mm / 120mm
- Radiator support: Upper: 240mm / 120mm
- Radiator support: Rear: 120mm
- Cable management: 27 mm