Tp-link TL-SG1218MP V2 switch

EU Plug18-Port Gigabit Rackmount Switch with 16 PoE+ Ports.

- 16 Gigabit PoE+ RJ45 ports, 2 Gigabit non-PoE RJ45 ports, and 2 Gigabit SFP combo slots.

- High PoE power budget with up to 30W for each PoE port and 250W for all PoE ports*.

- Works with IEEE 802.3af/at compliant PDs.

- Plug and play, no configuration and installation required.

- 802.1p/DSCP QoS enables latency-sensitive smooth traffic.

- Durable metal casing and professional heat dissipation design ensure a wide operating temperature range (0 - 50℃).

16-Port PoE+ Switch Dedicated (250W budget) for Numerous Applications.

Compliance with 802.3af/at PoE+ standard supports up to 30W on each PoE port.

A total PoE power budget of 250W.

- for the 16× gigabit PoE+ ports makes it suitable for a wide range of applications, from surveillance to networking in offices, dormitories, and small businesses.

It is fully compatible with IP cameras, access points, IP phones, computers, printers, etc.

QoS for a Lag-Free Experience.

Ensures smooth traffic for latency-sensitive applications like voice and video by designating traffic priority according to Quality of Service (QoS).

Intelligent Power Management to Prevent Power Overload.

When its total power consumption exceeds 250W, Intelligent Power Management will automatically cut the power of lower priority ports to ensure the power supply of higher priority ports.

This protects the device from power overload operation.

It also automatically detects the PoE power required for your device and protects your non-PoE equipment from damage.

Wide Operating Temperature with Good Heat Dissipation.

The durable metal casing and professional heat dissipation design ensure a wide operating temperature (0 - 50℃) with reliability.

Multiple Application Scenarios.

The TL-SG1218MP is fully compatible with PoE devices such as IP cameras, access points, and IP phones.

It also works with non-PoE wired devices to provide gigabit connections, such as PCs, printers, and IPTV.

Specifications.

Hardware.

Standards and Protocols:IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.1q, IEEE 802.1p.

Interface:16 Gigabit PoE+ RJ45 ports, 2 Gigabit non-PoE RJ45 ports, and 2 Gigabit SFP combo slots.

Network Media:10BASE-T:UTP category 3, 4 or 5 cable (up to 100m).

10BASE-T:STP 100Ω cable (up to 100m).

100BASE-TX:UTP category 5 or 5e cable (up to 100m).

100BASE-TX:STP 100Ω cable (up to 100m).

1000BASE-T:UTP category 5, 5e, 6 or above cable (up to 100m).

1000BASE-T:STP 100Ω cable (up to 100m).

1000BASE-X:Compatible with MMF and SMF.

Fans:2.

Physical Security Lock:Supported.

Power Supply:100 - 240 V AC, 50/60 Hz.

PoE Ports:16 RJ45 ports supporting IEEE 802.3af/at.

PoE Budget:250 W.

Dimensions:440 × 180 × 44 mm.

Mounting:Rack Installation.

Max Power Consumption:21.4 W without PoE devices connected.

286.64 W with PoE devices up to 250 W connected.

Max Heat Dissipation:72.97 BTU/h without PoE devices connected.

977.44 BTU/h with PoE devices up to 250 W connected.

Switching Capacity:36 Gbps.

Packet Forwarding Rate:26.78 Mpps.

MAC Address Table:8K.

Packet Buffer Memory:4.1 Mbit.

Jumbo Frame:10 KB.

Advanced Functions.

PoE Compatibility:Compatible with IEEE 802.3af/at.

QoS:Supports 802.1p and DHCP.

MAC Addresses:Auto-learning and auto-aging.

Flow Control:IEEE 802.3x for Full Duplex and Backpressure for Half Duplex.

Certifications and Content.

Certifications:CE, FCC, RoHS.

Package Contents:TL-SG1218MP Switch.

Installation Guide.

Power Cord.

Rackmount Kit.

Rubber Feet.

Environmental Conditions.