Xiaomi Mesh System AX3000 NE speaker 2 units

Pack of 2 units Xiaomi Mesh System AX3000 NE with dual-band 2.4 GHz/5 GHz Wi-Fi 6 and wireless speed up to 3000 Mbps.

Dual-band 5GHz + 2.4GHz - Wi-Fi 6 - 1.0 GHz dual-core CPU - Wireless speed up to 3000 Mbps - 256 MB DDR - 128 MB Flash - 256 devices - 2x2 networks - OFDMA transmission - Supports IPv6 - Xiaomi Home/Mi Home app - Optimized for Xiaomi Smart Home - 2 units.

The 2-unit pack of the Xiaomi Mesh System AX3000 NE provides long-range wireless coverage in our home, as well as a fast connection speed of up to 3000 Mbps thanks to support for the advanced Wi-Fi 6 standard and simultaneous dual-band 2.4 GHz and 5 GHz.

Its white design presents an elegant and minimalist appearance, and incorporates NFC technology to connect your devices to the network without having to manually enter the password.

Real-time Wi-Fi coverage without interruptions or dead zones.

The Mesh technology developed by Xiaomi supports wired and wireless methods, as well as a combination of both to achieve a distributed network with multiple routers.

Likewise, the Xiaomi Mesh System AX3000 NE has link self-repair capabilities at the millisecond level, automatically optimizing the network topology to provide real-time Wi-Fi coverage without interruptions or dead zones.

Wi-Fi 6 technology with wireless speeds up to 3000 Mbps.

With support for dual-band Wi-Fi 6 technology (2.4 GHz and 5 GHz), the Xiaomi Mesh System AX3000 NE offers wireless speeds of up to 3000 Mbps*.

In fact, the 5GHz band alone offers an ultra-wide bandwidth of 160 MHz, resulting in a 2.8x speed increase compared to its Wi-Fi 5 predecessor.
*3000 Mbps is a theoretical value calculated based on the IEEE 802.11 Standard, and actual speeds may vary depending on environmental conditions.

Automatic switching to higher speed Wi-Fi nodes.

When moving around the house or office, the Mesh technology of the Xiaomi AX3000 NE allows your electronic devices, such as smartphones and tablets, to automatically switch to higher speed Wi-Fi nodes*.

In this way, the signal is always maintained in optimal conditions.

In addition, it supports the simultaneous connection of up to 256 devices. Requires electronic devices, such as smartphones and tablets, to support 802.11k/v protocols.

256 devices refers to comprehensive access values under laboratory conditions for 2.4G/5G/LAN.

NFC technology for a quick Wi-Fi connection.

Forget about entering passwords! The Xiaomi Mesh System AX3000 NE incorporates NFC technology.

You only have to bring your phone close to the top of the router to connect to Wi-Fi quickly.

In addition, you can use any Android or iOS device to see the status of the home network in real time, as well as manage home devices remotely.

Requires an Android phone with NFC functionality enabled, used in an unlocked state.

Special functions for Xiaomi smart devices.

And if you configure some Xiaomi smart devices through the Xiaomi Home/Mi Home application and subsequently change the router´s Wi-Fi password, the new password will be automatically synchronized on the aforementioned devices.

On the other hand, the Xiaomi Mesh System AX3000 NE automatically recognizes Xiaomi/Redmi phones and opens an exclusive acceleration channel in gaming scenarios to significantly reduce lag and latency.

Requires both the Xiaomi Router and Xiaomi smart devices to support this function.

Pack of two units pre-paired from the factory.

Of course, this pack of two Xiaomi AX3000 NE devices comes pre-paired from the factory.

Choose any unit as the main router and the other as the satellite router.

After configuring the main router network, the satellite router will proceed to create the Mesh network simply by turning it on.

Excellent durability and performance backed by multiple tests.

As if that were not enough, the Xiaomi Mesh System AX3000 NE supports automatic WAN/LAN detection, LAN aggregation, IPTV, WPA3 encryption, IPv6 and more intelligent functions for you to explore.

It also provides excellent durability and reliable performance backed by multiple tests.

What are the differences between the AX3000 NE and the AX3000? To conclude, we will highlight the main differences of the AX3000 NE with respect to the Xiaomi Mesh System AX3000, the most notable being the NFC function of the AX3000 NE, which allows easy access to Wi-Fi without having to manually enter the password.

It also includes other features such as game acceleration, Xiaomi Easy Connect, LAN aggregation, automatic WAN/LAN and IPTV detection, and optimizes the design to achieve a more refined and minimalist appearance.

Technical specifications Xiaomi Mesh System AX3000 NE:.

General parameters.

Brand: Xiaomi.

Product: Wi-Fi Mesh System.

Model: AX3000 NE (RD28).

Hardware configuration.

Processor: Qualcomm IPQ5018 dual-core at 1.0 GHz.

DDR Memory: 256 MB.

Flash memory: 128 MB.

5G Wi-Fi Chipset: QCN6102.

5G Wi-Fi Speed: 2402 Mbps (2x2 160 Mhz).

5G FEM: ePA (medium power).

4G Wi-Fi Chipset: Integrated into the SoC.

4G Wi-Fi Speed: 576 Mbps (2x2 40 Mhz).

4G FEM: ePA (medium power).

Wi-Fi Standard.

2x2 MIMO, 802.11 ax, 574 Mbps.

2x2 MIMO, 802.11 ax, 2402 Mbps.

Modulation.

11b: DSSS: DBPSK (1Mbps), DQPSK (2Mbps), CCK (5.5/11Mbps).

11a/g: OFDM: BPSK (6/9Mbps), QPSK (12/18Mbps), 16QAM (24/36Mbps), 64QAM (48/54Mbps).

11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM.

11ac: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM.

11ax: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM, 1024QAM.

Other features.

Ethernet ports: 4x 10/100/1000 Mbps - adaptable WAN/LAN.

Temperature: 0-40℃ (operational), -40-70℃ (storage).

Humidity: 10-90% RH (operational), 5-90% RH (storage).

Input power: 12 V/1 A.

Aesthetic parameters.

Dimensions: 89.5x89.5x213.5 mm.

Color: White.

Package content.

2 x Xiaomi Mesh System AX3000 NE.

2 x Power cable.

1 x Network cable.

1 x User manual.