Absima 1/10 Brushed Crawler Pro ESC 80A electronic speed controller

A standout advantage of the Absima controller is the significantly improved modulation, especially when driving slowly.

This precision allows for more sensitive control, while the beeping often produced by cheaper controllers is virtually non-existent here.

- Thanks to the programmable features via the Absima programming box (2110063 - not included), users can adjust over a dozen parameters.

This allows for optimal tuning of the controller to different requirements, not only for tracked vehicles but also for conventional RC cars with 540/550 class brushed motors.

- A brushless conversion is not always necessary, especially for tracked models, as the standard motors installed in combination with this controller are much more sensitive than with the standard controller.

It also has some special features, such as a drag brake that can be adjusted remotely (as long as a free channel with a potentiometer is available) and the real car mode, which can be useful for certain applications.

- In summary, the Absima controller is the best cost-effective option for your standard brushed motor in 1/10 scale and is ideal for modelers who value precise control and customization options.

- Features:

- Real Car Mode:

Use the idle channel of the remote control to switch the driving mode in real-time.

It allows you to shift between D and R gears like a real car.

The neutral function is similar to the brake pedal function of a real car.

It provides a new control experience (the real car mode can be adjusted via a handy bridge on the remote).

- Another bridge also allows switching the BEC output to 6.0 V, 7.4 V, and even 8.4 V at 5 A to meet different steering requirements (powerful steering servo) and provide a strong power supply for, for example, lighting systems and winches.

- It features several driving modes such as forward/brake, forward/brake/reverse, and forward/reverse.

- Technical Specifications:

-Application:

1/10 Brushed Crawler and other RC cars.

- 13 programmable parameters adjustable via programming box (sold separately).

- Water/Dust Proof:

Yes (IP67).

- Usable Motor Types:

540/550 brushed motor.

- Continuous/Pulse Current:

80A / 320A.

- Battery Supply:

2-3S LiPo / 4-9 NiMH cells.

- BEC Output:

5A at 6.0V/7.4V/8.4V (switched mode).

- Resistance 0.0014ohm.

- Battery Connection System:

T Connector.

- Cable Lengths:

Motor Cable:

20 cm / Power Cable:

20 cm / JR/Futaba Signal Cable:

20 cm / Fan Connection:

8 cm.

- Dimensions:

42 x 35.2 x 26.6 mm.

- Weight:

66 g (cable included).

-Supply Volume:

-1* Crawler PRO Remote Control.

-1* Manual.

- Manual.

-ElektroG3 Information.