D-link DGS-1520-52MP/E 44 switch

EU Plug.

D-Link Introduces New DGS-1520 Series of Smart Multigigabit Stacking L3 Switches D-Link has unveiled its new DGS-1520 series of Smart Multigigabit Stacking L3 Switches, consisting of 4 models with different port densities, featuring physical stacking, Multigigabit connectivity (Gigabit, 2.5 Gigabit, and 10 Gigabit), and advanced Layer 3 management functions to adapt to any network environment with ample flexibility and an unbeatable cost/performance ratio.

Key.

Features:

Models:28 and 52 Gigabit port models, all with 10 Gigabit uplinks via 10GBASE-T copper or SFP+ fiber for long-distance environments.

Stacking:Supports stacking of up to 8 switches per stack, using either fiber (2 SFP+ ports) or copper (2 10G Base-T ports), or in hybrid mode (2 copper and 2 fiber), which adds flexibility and reduces cabling costs by using copper instead of all fiber.

Stacking Bandwidth:Achieves a bandwidth of 80G and up to 384 gigabit ports per stack.

PoE Versions:PoE (Power Over Ethernet) versions integrate 4 Multigigabit PoE ports, ideal for connecting Wi-Fi 6 access points, as Gigabit ports are no longer capable of providing all the bandwidth needed by Wi-Fi 6 technology.

Layer 2 and Layer 3 Management:In addition to its flexibility in terms of copper and fiber port range and Multigigabit capability, this series stands out for offering powerful Layer 2 and Layer 3 network management functions.

Management.

Features:

These include DHCP Server, RSPAN and selective Q-in-Q, IGMP snooping, dynamic routing, Routing Information Protocol (RIP), and Open Shortest Path First (OSPF).

Redundancy:They also have the functions to create redundant network topologies in rings using Ethernet Ring Protection Switching (ERPS) and Virtual Router Redundancy Protocol (VRRP).

Physical Redundancy:RPS power supplies (DPS-520) can be connected to ensure operation if the integrated power supply fails.

PoE Budget:In the case of PoE models, the PoE Budget increases from the original 370W to 740W.DGS-1520 Series Switch Management and Features The DGS-1520 series can be managed through a web GUI using any web browser.

Alternatively, for local access without internet connectivity, you can use the console port and manage it through the full CLI command-line interface.

D-Link´s D-View 7 network management software can also be used for a simplified process in deploying the network topology at the switch level and all connected devices.

Specifications:

Management.

Features:

Switch Type:Managed Switch Layer:L3 Web-based Management:Yes Ports and Interfaces:Number of Basic RJ-45 Ethernet Switching Ports:2 Basic RJ-45 Ethernet Switching Port Type:10G Ethernet (100/1000/10000) Number of Fast Ethernet (copper) Ports:4 Gigabit Ethernet (copper) Ports:44 Fiber Channel Ports:2 Fiber Optic Connector:SFP+ Connectivity:10G Support:Yes Flow Control Support:Yes Link Aggregation:Yes Auto MDI/MDI-X:Yes Spanning Tree Protocol:Yes Head-of-Line Blocking (HOL):Yes VLAN Support:Yes Data Transmission:Switching Capacity:188 Gbit/s Forwarding Rate:139.88 Mpps MAC Address Table:16384 entries Store and Forward:Yes Static Route:Yes Jumbo Frames Support:Yes Jumbo Frames:12288.

Security:IGMP:Yes Loop Protection:Yes BPDU Protection and Filtering:Yes Multicast.

Features:

Multicast Listener Discovery (MLD):v1/v2 Protocols:GARP VLAN Registration Protocol (GVRP):Yes Routing Protocol:OSPF, RIP, RIPng, VRRP Design:Stackable:Yes Form Factor:1U Product Color:Black Performance:Physical Stacking (units):8 Virtual Stacking (units):32- Noise level:56.7 dB.

- Mean time between failures:328174 h.

- Power control:- AC input voltage:100.

- 240 V.

- Power consumption (max):459.5 W.

- Power over Ethernet (PoE).

- Power over Ethernet (PoE):Yes.

- Power over Ethernet (PoE).

Specifications:

370 W.

- Environmental conditions,.

- Heat dissipation:1635.1 BTU/h.