Hpi Racing SC3SWP2 Waterproof electronic speed controller

Waterproof, powerful, rugged and now even smaller than before! The SC-3SWP2 is a powerful and durable speed controller that is fantastic for RC vehicles of all types! Whether you´ve got a touring car, buggy or truck, this is the ideal unit to control the power for any vehicle equipped with a brushed motor of 12 turns or more.

The SC-3SWP2 is also fully waterproof, making it the only choice for anyone who enjoys playing on the beach, in snow or even through mud! This new ´version 2´ is smaller than the original, making it perfectly sized to fit in the tight spaces of the latest RC vehicles, whether you have a touring car racer or desert buggy! If you´ve got plenty of power to strap into your RC, you can count on the SC-3SWP2 to handle it:

able to handle LiPo power of 2S and 3S or between 5 and 9 NiMH cells, this speedo can handle just about anything can you fit into the chassis! Of course, a safety cut-off is fitted to protect your LiPo batteries.

The SC-3SWP2 is great for all kinds of 1/10th scale vehicles:

buggies touring cars drifters Mini racers desert buggies vintage touring cars stadium trucks short course trucks desert trucks Fit the SC-3SWP2 in your RC vehicle so you can see for yourself what toughness, versatility and durability is all about! Features:

2S or 3S LiPo with voltage protection 5-9 cell NiMH or NiCd Suitable for all types of 1/10th scale vehicles Specification:

Forward Continuous Current:

60A Forward Burst Current:

360A Reverse Continuous Current:

30A Reverse Burst Current:

180A Input:

2-3S LiPo, 5-9 cell NiMH/NiCd Applications:

1/10 on-road, off-road buggy, short course truck, truggy, crawler, tank, boat Motor Limit:

2S LiPo or 6 cell NiMH:

540 or 550-size motor greater than or equal to 12 turns, RPM limit 30,000 at 7.2v Motor Limit:

3S LiPo or 9 cell NiMH:

540 or 550-size motor greater than or equal to 18 turns, RPM limit 20,000 at 7.2v Resistance:

FWD 0.001 Ohm, BWD 0.002 Ohm PWM Frequency:

1 KHz BEC:

6V/3A Dimensions:

36.5x32x18mm Weight:

39g NOTE:

Before driving in wet conditions, make sure that other electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case).

Fans mounted on speed controllers are not water resistant - we recommend disconnecting the fan from the ESC before driving in wet conditions and allowing it to dry fully before reconnecting the fan power.

Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions.

Motors are not intended for submerged use and may be damaged if used when underwater.

After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.

Download PDF instructions for 114712 (7.7 MB)