Lian Li Lancool III E-ATX PC tower case

Features:

Extreme Airflow Craftsmanship:
- A Fine Mesh Design Has Been Implemented On The Front, Top And Both Bottom Side Panels Of The Lancool Iii.

Upper And 2 Lower Side Panels:
- The Two Bottom Side Panels Provide Sufficient Airflow To Efficiently Cool The Gpu When The Fans Are Installed Above The Psu Shroud.

Front Panel:
- The 51% Porosity Offers A Wide Direct Entry Of Fresh Air.

Hinged-Around Panels:
- Hinged Tempered Glass Side Panels Offer An Unobstructed View Of The Interior Setup , While Bottom Cover Panels Provide Quick Access To The Power Supply And Storage Drives.
- The Two Removable 4mm Tempered Glass Panels Located On Each Side Of The Case Can Be Opened By Pulling The Front Aluminum Handle.
- The Mesh Panels Located On Either Side Of The Psu Shroud Area Can Be Removed For Cleaning When The Front Panel Is Not Attached.

Flexible Configuration:
- With A Large Interior Space , Lancool Iii Can Offer Different Cooling And Usage Scenarios.

Air-Conditioning:
- With High Airflow Standard Fans And Air Tower Clearance Of Up To 185mm, Lancool Iii Is Ideal For An Air-Cooled Build.

All-In-One Cooling:
- With A Wide Front Inlet , Lancool Iii Can Provide Great Performance For An Aio Cooling Build. The Top Fan Bracket Can Support Up To 3 X 120mm/140mm Fans And Offers Enough Thickness Clearance For An All-In-One With A 420 Radiator/Fan Combo.

Custom Water Cooling:
- With The Ability To Support 3 × 360mm Radiators Simultaneously, Lancool Iii Can Offer Custom Water Cooling Enthusiasts Plenty Of Imagination.

Spacious Cooling Stand:
- The Lancool Iii Is Optimized For Water Cooling And High-End Thermal Solutions. A Maximum Of 10 120mm Fans Or A Large 420mm Radiator Can Be Mounted In The Main Chamber.

Multi-Directional Front Fan/Radiator Support:
- The Multi-Directional Front Fan Mount Offers 4 Different Ways To Mount A Radiator Or Fans To Meet Different Cooling Needs, And Features A New Latch/Handle Mechanism To Easily Secure It In Place Without The Need For Locking Thumb Screws.

Removable Top Fan Bracket:
- The Removable Top Fan Bracket With Offset Fan Mounting Points Allows A Thicker Fan/Radiator Combination To Be Installed On Top Of The Lancool Iii By Providing Sufficient Clearance From The Ram.

Modular Psu Cage Bracket: Fan/Pump/Ssd:
- The Adjustable Modular Psu Shroud Bracket Can Accommodate 1 X 360mm Radiator, 3 X 120mm Fans, 3 X 2.5´´ Ssds, Or Pump/Reservoir Combos.

Side Multi-Use Mounting Slots:
- The Mounting Slots Next To The Base Plate Are Provided 105mm Apart (Standard 120mm Fan Mounting Points) To Allow Installation Of A Distribution Board Or Reservoir/Pump Bracket.

Large Storage Capacity:
- Multiple Storage Drive Mounting Locations Are Supported For Up To 12 X 2.5´´ Ssds Or 4 X 3.5´´ Hdds And 8 X 2.5´´ Ssds.

Unit Box:
- Adjustable 2 Drive Cages (Each For 2 X 3.5´´ Hdds Or 2 X 2.5´´ Ssds) That Can Be Individually Removed Or Adjusted.

Tool-Less Ssd Tray:
- Two Spring-Loaded Sdd Trays Located Behind The Motherboard Tray Allow For Tool-Less Drive Installation.

Side Ssd Tray:
- Side-Mounted Ssd Trays Located Inside The Right Psu Shroud Panel Can Accommodate Up To 3 X 2.5´´ Ssds Or Can Be Removed To Improve Airflow.

Integrated Cable Management:
- Since The Second Camera Located On The Right Side Is Visible, A Lot Of Attention Has Been Paid To Cable Management . Lancool Iii Features An Improved Solution To Ensure Tidy Cable Routing With Tool-Less Magnetic Cable Cover Doors And A Well-Organized Layout For Hubs And Cables.

Cable Routing Slide Cover:
- By Slightly Loosening The Two Rear Thumb Screws, The Cable Cover Can Be Adjusted To Accommodate Different Sizes Of Motherboards.

Reversible Front I/O:
- Optimized For Placing The Pc On A Desktop, The Front I/O Can Be Relocated To The Bottom Of The Chassis.

Easy Psu Installation:
- The Removable Psu Mounting Bracket Allows The Psu To Be Installed Outside Of The Chassis , Then Slide In From The Rear.

Anti-Sag Support For Gpu Perfectly Horizontal:
- A Gpu Anti-Sink Mount Is Included For Seamless Hardware Viewing Through The Tempered Glass Side Panels.


Specifications:

Design:
- Format: Eatx
- Materials: Steel, Aluminum, Tempered Glass
- Supported Motherboards: Atx, Eatx, Micro-Atx, Mini-Itx, Ssi Eeb
- Side Window: Yes
- Number Of Expansion Slots: 8
- Cpu Heatsink Maximum Height: 170mm
- Maximum Graphics Card Length: 423mm
- Integrated On/Off Switch: Yes

Storage Bays:
- Number Of Internal 3.5 Bays: 3
- Number Of 2.5 Internal Bays: 3
- Supported Hard Drive Sizes: 2.5´´, 3.5´´

Connectivity:
- Number Of Usb 3.0 Ports: Two
- Number Of Usb Type-C Ports: 1
- Audio Input: 1

Cooling:
- Maximum Side Fans: 3
- Maximum Front Fans: 3
- Supported Front Fans Diameter: 120mm, 140mm
- Maximum Top Fans: 3
- Supported Top Fan Diameters: 120mm, 140mm
- Liquid Cooling Capacity: Yes
- Compatible Rear Radiator Fan Size: 420mm
- Supported Top Radiator Fan Size: 280mm, 360mm

Weight And Measurements:
- Height: 595mm
- Width: 385mm
- Depth: 575mm