Trendnet TI-PG62 switch

EU Plug.

TRENDnet´s TI-PG62 is a reliable IP30 unmanaged DIN-rail PoE+ switch with a rugged housing rated for extreme industrial environments.

It offers 4 Gigabit PoE+ ports, one shared Gigabit port (RJ-45 / SFP), one dedicated SFP slot, and a 12 Gbps switching capacity.

Redundant power inputs and a power failure alarm relay.

Features:

PoE.

Power:- A 120 Watt PoE+ power budget supplies up to four Power over Ethernet devices with PoE+ power.

Fault Tolerance:- Features redundant power inputs (Primary and RPS) from external power sources and an output alarm relay to indicate the event of input power failure.

Industrial Hardened Design:- Equipped with a rugged IP30 rated enclosure and designed to withstand a high degree of vibration, shock, protection against ESD / EMI / surge, and operate with a wide temperature range (- 40.

- 75 °C (- 40.

- 167 °F)) for harsh environments.

Network Ports:- 4 x Gigabit PoE+ ports, 1 x shared Gigabit port (RJ-45 / SFP) and 1 x dedicated SFP slot Redundant.

Power:- Redundant power inputs with overload current protection (power supply sold separately models:48VDC3000 / TI-S24048 / TI-S12048) Extreme Temperatures:- Hardened switch is rated for an operating temperature range of -40 to 75 ºC (-40 to 167 ºF) Shock and Vibration Resistant:- Rated for shock (IEC 60068-2-27), freefall (IEC 60068-2-32), and vibration (IEC 60068-2-6) DIN-Rail / Wall Mounts:- IP30 rated metal enclosure with included DIN-rail and wall mount hardware Alarm Relay:- Alarm relay triggered by power failure of primary and / or redundant power Electro Magnetic Compliance:- Complies with FCC Part 15 Subpart B Class A and CE EN 55022 Class A standards Grounding Point:- Grounding point protects equipment from external electrical surges Switching Capacity:- 12 Gbps switching capacity Jumbo Frame:- Sends larger packets, or Jumbo Frames (up to 9 KB), for increased performance.

Specifications:

Standards:- IEEE 802.3.

- IEEE 802.3u.

- IEEE 802.3ab.

- IEEE 802.3z.

- IEEE 802.3x.

- IEEE 802.3af.

- IEEE 802.3at Device Interface:- 4 x Gigabit PoE+ ports.

- 1 x Shared Gigabit port.

- 1 x Shared SFP slot.

- 1 x Dedicated SFP slot.

- 6-pin removable terminal block.

- LED indicators.

- DIP switch.

- DIN-Rail mount.

- Wall mount.

- Grounding point Data Transfer Rate:- Ethernet:10 Mbps (half duplex), 20 Mbps (full duplex).

- Fast Ethernet:100 Mbps (half duplex), 200 Mbps (full duplex).

- Gigabit:2000 Mbps (full duplex).

Performance:- Data RAM Buffer:1024 KB.

- Switching Fabric:12 Gbps.

- MAC Address Table:1 K entries.

- Jumbo Frame:9 KB.

- Forwarding rate:8.9 Mpps (64-byte packet size) Special.

Features:

- Hardened components rated for extreme temperatures.

- Redundant power inputs.

- Auto-Negotiation.

- Auto store and forward architecture.

- Automatic address learning and address aging DC.

Power:- Input:48.

- 56 V DC.

- Compatible power supply:TI-S12048 (sold separately).

- Consumption:Max.

5.76 Watts (no PoE) AC.

Power:- Input:100.

- 240 V AC, 50/60 Hz, 2 A.

- Compatible power adapter:48VDC3000.

- Output:48V DC, 3.34 A 160 W max.

- PoE:PoE budget:120 Watts Terminal Block:- Redundant power inputs, alarm relay contact, 6 pin.

- Wire range:0.34 mm^2 to 2.5 mm^2.

- Solid wire (AWG):12-24/14-22.

- Stranded wire (AWG):12-24/14-22.

- Torque:5 lb.

- In / 0.5 Nm / 0.56 Nm.

- Wire strip length:7-8 mm DIP Switch:- OFF (port 5 SFP on, default), ON (port 5 SFP off).

- OFF (SFP 1000M, default), ON (SFP 100M) Alarm Relay Contact:- Relay outputs with current carrying capacity of 1A, 24V DC.

- Open circuit mode when two power sources are connected.

- Short circuit mode when only one power source is connected.

- MTBF:460,304 hours Housing:- IP30 metal case.

- DIN-rail mount.

- Wall mount.

- Grounding point.

- ESD Protection:Contact:6kV / Air:8kV.

- Surge Protection:2kV.

- Operating Temperature:- 40 to 75 °C (-40 to 167 °F).

- Operating Humidity:Max.

95 % non-condensing.

- Dimensions:143 x 105 x 36 mm (5.6 x 4.1 x 1.4 in.).

- Weight:500 g (1.1 lb).