Powerslide Zoom pro 100 inline skates

Zoom Pro 100 Black Mint – Built for Speed, Designed for the Streets:
- Classic black meets urban edge. The Powerslide Zoom Pro 100 Black is your go-to inline skate when performance, control, and style collide. Blending stealth aesthetics with refined turquoise highlights, this skate is engineered for skaters who crave power, speed and agility while maintaining that clean, low-key look. Whether you’re shredding the city or just flowing through your favorite route — this skate won’t miss a beat.

All About the Fit: The Boot & Liner Combo:
- Step in and feel the comfort. The Zoom Pro 100 wraps your foot in a tough, supportive hard shell that doesn’t sacrifice comfort. Equipped with the new, now heat-moldable MYFIT Basic Dual Fit liner, this skate offers reliable support and a soft interior feel. Whether you’re lacing up for a long session or a quick ride, this liner delivers consistent comfort every time.

Lockdown is handled by a Powerslide Classic top buckle, a Crown ratchet mid-strap, and standard waxed laces – giving you that perfectly secure, no-slip fit. It´s a closure system built to withstand tough urban riding while keeping your feet right where they should be.

Urban Engineering: Frame, Wheels & the TRINITY 3-point mount:
- Underneath, the Zoom Pro 100 is powered by the sleek Elite cast aluminum frame, coming in two configurations: 231mm frame for sizes 37/38 to 41/42, and 259mm for sizes 42.5/43 to 46/47. This flexibility ensures every skater gets the optimal frame length for their foot size — and their riding style.

The skate rolls on Powerslide Hurricane wheels, 100mm with a grippy 85A hardness rating. They’re fast, smooth, and ready to take on everything from city streets to rougher surfaces. Inside each wheel spins a Wicked ABEC 9 carbon steel bearing, keeping your motion fluid and your energy efficient.

At the core of it all is the TRINITY 3-point mounting system – Powerslide’s game-changing tech that connects boot to frame like no other. This setup lowers your center of gravity, improves stability, and maximizes power transfer. It’s a noticeable difference that you’ll feel in every turn, every push, and every brake.

Blackout Power with a Pop of Style:
- The Zoom Pro 100 Black isn’t loud — it doesn’t need to be. Its smooth black shell, subtle curves, and turquoise details say everything without a word. This skate is made for skaters who like their gear tough, responsive, and refined. So lace up, lean in, and ride like the city is your personal track. Because with the Zoom Pro 100, it kind of is.

Features:

- Top notch urban hardboot skate with a nice wide fit
- Advanced TRINITY 3-point mounting – Low center of gravity, perfect power transfer, and increased stability make every stride more efficient and every surface more manageable.
- Heat-moldable MYFIT Basic Dual Fit liner for snug comfort and reliable fit
- Micro-adjustable PS Classic Buckle, micro-adjustable Force ratchet buckle, and waxed laces for a secure fit
- Responsive urban skate setup – Lightweight 231mm/250mm Elite cast aluminum frame in combination with Hurricane 100mm/85A HR wheels for a smooth and controlled ride.

Specifications:

- Shell / Outsole Material: Glass-fiber reinforced plastic (GFRP)
- Length of Laces: 140cm
- Liner: MYFIT Basic dual fit liner
- Innersole: MYFIT EVA skatesole
- Frame Name: Powerslide Elite
- Frame Mounting Standard: TRINITY 3-point mounting
- Frame Material: ADC10 aluminum
- Frame Manufacturing Process: 3D cast
- Frame Wheel Base ( MM): (231mm)
- Max. Wheel Size: 100mm
- Adjustable Side to Side: Yes, TRINITY X shell, 7mm
- Adjustable Front to Back: Yes, TRINITY X shell, 8mm
- Wheel Name: Powerslide Hurricane
- Wheel Diameter: 100mm
- Wheel Hardness: 85A
- Wheel Compound: HR= High Rebound, Cruising Comfort
- Wheel Setup: 3x100mm
- Bearing Brand: WCD Wicked
- Bearing Rating: ABEC 7
- Bearing Material: Carbon pro steel
- Bearing Shield: RZ, single sided rubber coated steel shield

Technology:

Trinity:
- Trinity: is our patented three-point mounting system, it’s the cutting edge of modern Inline skate technology. TRINITY features dual front mounting points to create a deep grooved channel for the wheels allowing them to sit as close to the foot as possible, dramatically lowering the center of gravity. This triangulated mount creates a solid platform and increases energy transfer efficiency. TRINITY works perfectly for 3 wheel setups but also provides outstanding advantages to 4 wheeled skates:
- Better Power Transfer: Thanks to the power triangle formed by the 3 mounting points.
- Stronger: Because the forces are spread over 3 mounting points.
- More Control: due to the strong 3-point connection of boot and frame and the wide distance between the two front mounting.
- Easier Skating: the power triangle also helps with your weight transfer and balance.
- Lower Center of Gravity: This means more control, stability, and safer skating.
- X-Slot mounting to customize the frame position under your boots
- Fatigue Control: TRINITY not only boosts the performance but also absorbs 30% more vibration and eases the roll over cracks and rough surfaces making every moment on your wheels as effortless and enjoyable as possible.

Triskates:
- Three big wheels offer a bigger footprint than 4 small wheels, with more PU in contact with the ground you get more response out of corners. So that’s why fewer wheels mean more grip. In addition, three-wheel frames are lower and shorter than their 4 wheel frame counterparts with smaller sized wheels, making it easier to maneuver and control your stride. With the center wheel right under the skater’s center of gravity, turns are easier and the whole skating experience feels more natural. All these features make it easier to adopt a proper skating technique. An additional benefit is the lower weight which makes skating more fun and less energy-consuming, allowing you to skate for a longer time whilst improving your endurance.

X-Slot Mount:
- The combination of the ‘along’ mounting block in Powerslide boots and the ‘across’ mounting slot on Powerslide frames is forming an “X”. The X-Slot Mounting System allows skaters to shift the frames under their boots in all directions to find the best Individual Frame Alignment for them. The X-Slot technology can be found in Powerslide skates featuring both a regular 2-point mounting system and our TRINITY X 3-point mounting standard.

3D Cast Frames:
- 3D cast frames are perfectly shaped around the wheels enclosing them and optimizing the space to outmaneuver any other frame. The 3D construction enhances the stiffness and power transfer and offers similar performance characteristics found in CNC made frames. Thanks to its lower center of gravity and sturdy construction TRINITY 3D cast frames score very high in terms of acceleration, control, and top speed. These facts are also race proven by many skaters and the most outstanding achievement is winning the Berlin Marathon in 2018 and second place in 2019 with Katherina Rumpus, one of the best and strongest Marathon skaters ever.

MYFIT Dual Fit:
- The shells of hardboot skates will always cover two sizes no matter which brand you take. So why not use a liner which sufficiently covers two sizes, instead of two single size liners where the smaller size liner comes with thicker padding to fit up the shell? The toe part of a Dual Fit liner is made of 4-way stretchable SBR material which expands and provides a snug comfortable fit and enhances performance. Allowing us to cater to two sizes, with a single liner.

Single Axle System:
- Single Axles are very common in high-end skates. They enable the athlete to maintain and exchange wheels effortlessly with just one tool in a very short time.

MYFIT:
- MYFIT says it all – We want to improve skating performance by providing the tools for a better fit and comfort. Every foot is different and even a person´s left and right feet are usually not the same. This might result in discomfort with inline skates. Purchasing a bigger size than the regular shoe size is not a solution as your feet will have too much room in the skates. Your feet will move, which means there is friction which can cause blisters. Additionally, you will lack performance as your power transfer and reactivity will decrease. One solution to improve the fit of your skates is the MYFIT heat molding technology. Powerslide offers various heat moldable skates. You can either adjust the shell, the liner, or the entire boot to your individual anatomy in order to customize and optimize the fitting, comfort, and performance. The MYFIT-logo on skates or liner indicates the heat molding option. For further information check details on the Powerslide website for the particular skate model or contact either your favorite shop or Powerslide directly.

3D Anatomical Padding:
- Anatomically shaped and positioned foam padding for more comfort and better performance. The special embossed foam layers adapt perfectly to the skater´s foot and guarantee a comfortable fit and optimized heel lock for better overall performance. It is pre-shaped to fit asymmetrical ankle positions, provides extra heel look, and has smooth and thin edges to avoid pressure points. One-piece embossed padding to fit all skates.

Vegan technology:
- All our vegan products are 100% free from materials and ingredients derived from animals including the glue we use in production. Our vegan products can be found in all segments across the wide Powerslide collection as well as under Chaya, Ennui or other Powerslide registered brands.