Dive Rite FT1/XT2 Basic Openwater DIN diving regulator set

The FT Advanced Open Water Regulator Package draws from our technical roots for a regulator setup that any diver can appreciate.

The FT1 First Stage´s fixed turret design and flat LP and HP ports allow hoses to run straight out from the side of the regulator for more streamlined hose routing.

The primary second stage is routed under the divers arm on a 40-inch flex hose with an angled adapter.

This routing keeps the hose from flaring out and the longer hose allows for comfortable air sharing in an emergency situation.

The backup second stage is on a 22-inch flex hose with a necklace that can be quickly accessed if necessary.

The high quality Mini Tech 2-inch Brass SPG is on a 30-inch flex hose with boot and stainless clip is meant to be attached on the waist or chest D-ring for easy viewing.

For transporting your FT Advanced Open Water Regulator Package to and from the dive site, a carrying bag is included.

Available in Yoke or DIN.

FT1 First Stage.

XT2 Second Stage, Black cover.

XT2 Second Stage, Yellow cover.

40 in LP hose.

22 in LP hose.

Right angle regulator adapter.

Regulator necklace.

2 in SPG with 30 in hose.

Small swivel bolt snap.

Hose clip retainer.

Regulator Bag.

The FT Advanced Open Water Regulator Package consists of our FT1 High Performance Fixed Turret First Stage, a matched set of XT2 Balanced Second Stages, and a Mini Tech 2-inch SPG.

Along with all of the main components, accessories such as clips and necklaces are included.