Daiwa Universal LT spare spool

Answer of Ángel

I´ve answered this question more than ten times for other users. The compatibility chart is on the Daiwa website: products/reels/bobine-universelle

He contestado a otros usuarios más de diez veces a esta pregunta. La tabla de compatibilidades está en la web de daiwa: productos/carretes/bobine-universelle

Answer of Ángel

The compatibility table is on the Daiwa website: products/reels/bobine-universelle

La tabla de compatibilidades está en la web de daiwa: productos/carretes/bobine-universelle

Answer of José Antonio

Hello! The spool is compatible with any LT model except the Fuego. Best regards. P.S.: Keep in mind that it has significantly more line capacity than the original spool. Otherwise, it fits perfectly.

Hola! La bobina es compatible con cualquier modelo LT menos con el Fuego. Un saludo. Pd: ten en cuenta que posee bastante más capacidad de hilo que la bobina original. Por lo demás, perfecta adaptación

Answer of Simone

For my direct experience these are compatible with Freams and Fuego (the last needs small adjustment) so it should be ok for Ninja as well.

For my direct experience these are compatible with Freams and Fuego (the last needs small adjustment) so it should be ok for Ninja as well.

Answer of István

Yes, all spools, including this universal spool, are compatible with all LT reels that have the same regular (!) drag type, within the same size (Ninja, Revros, Legais, Exceler, Fuego, Lexa). Beware though, that it will not be compatible with reels that have "alpha" type drag, like Caldia, Tatula, Ballistic, Prorex, Blast, Certate etc.

Yes, all spools, including this universal spool, are compatible with all LT reels that have the same regular (!) drag type, within the same size (Ninja, Revros, Legais, Exceler, Fuego, Lexa). Beware though, that it will not be compatible with reels that have "alpha" type drag, like Caldia, Tatula, Ballistic, Prorex, Blast, Certate etc.

Answer of Ángel

The compatibility table is on the Daiwa website. The references of the “original” LT reel spools are shown in the characteristics tables of each reel. However, there are also black “deep” universal spools made of aluminium and equipped with a plastic line clip. They are compatible with the following LT reels: Exceler20 LT, Exceler17 LT, Legalis20 LT, Legalis17 LT, Revros19 LT, Ninja18 LT, Laguna20 LT and Crossfire20 LT. For example, if you want to buy a spool for the EX20LT3000C reel, you can buy the original spool Q720301 or the compatible universal spool N00104U. I even think it is also valid for later versions of those same reels.

La tabla compatibilidades esta en la web Daiwa. Las referencias de las bobinas “originales” de los carretes LT se muestran en las tablas de características de cada carrete. Sin embargo, también hay bobinas universales “deep” negras de aluminio y equipadas con un clip de línea de plástico. Son compatibles con los siguientes carretes LT: Exceler20 LT, Exceler17 LT, Legalis20 LT, Legalis17 LT, Revros19 LT, Ninja18 LT, Laguna20 LT y Crossfire20 LT. Por ejemplo, si deseas comprar una bobina para el carrete EX20LT3000C, puedes comprar la bobina original Q720301 o la bobina universal compatible N00104U. Incluso creo que también vale para versiones posteriores de esos mismos carretes.

Answer of Ángel

The compatibility table can be found at DAIWA: They are compatible with the following LT reels: Exceler20 LT, Exceler17 LT, Legalis20 LT, Legalis17 LT, Revros19 LT, Ninja18 LT, Laguna20 LT and Crossfire20 LT.

La tabla de compatibilidades la encuentras en DAIWA: Son compatibles con los siguientes carretes LT: Exceler20 LT, Exceler17 LT, Legalis20 LT, Legalis17 LT, Revros19 LT, Ninja18 LT, Laguna20 LT y Crossfire20 LT.

Answer of Mauro

I bought it for a size LT2500 reel and it is perfect, unfortunately I can´t give the answer for the size 5000.

Io l’ho comprato per un mulinello taglia LT2500 ed è perfetto, per la taglia 5000 purtroppo non so dare la risposta.

Answer of Admir

According to Daiwa, the spool is compatible with ALL "LT" models, including "Prorex". The "D" indicates a deep spool.

Laut Daiwa ist die Spule mit ALLEN "LT" Modellen, auch "Prorex" kompatibel. Das "D" bezeichnet eine tiefe (D = deep) Spule.

Answer of Admir

Hello, according to the manufacturer it is compatible with ALL reels in the Daiwa "LT" series. The "D" stands for the "deep" spool (D=deep). The one offered here is a standard spool, not a deep one.

Hallo, laut Hersteller MIT ALLEN Rollen der Daiwa "LT" Serie kompatibel. Das "D" bezeichnet die "tiefe" Spule (D=deep). Die hier angebotene ist eine Standard Spule, keine tiefe.

Answer of Daniel

It will be compatible. Ask for 3000 for the ninja and 2500 for the legalis

Vai ser compatível. Pede 3000 para o ninja e 2500 para o legalis

Answer of Admir

Good morning, generally compatible with all Daiwa LT models. "CXH" only has something to do with the reel body, not the spool. Of course the size has to match: 2500 with 2500, 3000 with 3000, etc.

Guten Morgen, generell mit allen Daiwa LT Modellen kompatibel. "CXH" hat nur etwas mit dem Rollenkörper zu tun, nicht mit der Spule. Natürlich muß die Größe übereinstimmen: 2500er mit 2500er, 3000er mit 3000er usw.

Answer of Francesco

It is compatible, the difference lies in the calibration of the clutch, which is at the same time compared to the low-end LT models and therefore not at the level of the original BG black LT coil but lower.

È compatibile, la differenza sta nella taratura della frizione, che è contestualmente rapportata ai modelli LT di fascia bassa quindi non al livello della bobina originale del BG black LT ma inferiore.

Answer of Vincent

No 2500, the case is bigger

Non 2500, le boîtier est plus grand

Answer of Lopes

It is not compatible. Too small

Não é compatível. Muito pequena

Answer of Francesco

Hi, unfortunately this reel is not strictly suitable for the Daiwa Caldia as it does not have the housing for the bearing on the axis and not a small thing, the clutch is different, I recommend a specific accessory. However it is adaptable by eliminating the bearing and adjusting the excursion and the centering of the spool with the thicknesses that are usually supplied with all types of Daiwa reels. Spare greetings.

Salve, purtroppo questa bobina non è prettamente idonea al Daiwa Caldia poiché non ha l´alloggiamento per il cuscinetto sull´asse e cosa non da poco, la frizione è diversa, le consiglio un accessorio specifico. Tuttavia è adattabile eliminando il cuscinetto e regolando l´escursione e il centraggio della bobina con degli spessori che di solito vengono dati a corredo di tutti i tipi di mulinelli Daiwa. Ricambio i saluti.

Answer of Lopes

It doesn´t and it´s too small

Não da e muito pequena

Answer of Paul

Bought one for my Daiwa Freams 3000 LT and it fitted perfectly, Caldia looks very similar reel, hope that helps.

Bought one for my Daiwa Freams 3000 LT and it fitted perfectly, Caldia looks very similar reel, hope that helps.

Answer of Carlos

In principle, yes, in the LTs that I have tested they are perfect, and they are supposed to be universal for the Daiwa LTs.

En principio sí, en los LTque he probado van perfectas, y se supone que son universales para los daiwa LT.

Answer of Carlos

Both revros and exceler fit perfectly the only thing that has more capacity than normal

Tanto revros como exceler encajan perfectamente lo único que tiene más capacidad que la normal

Answer of Johan

Hello, reel compatible with DAIWA reels of the LT range

Bonjour, bobine compatible avec les moulinets DAIWA de la gamme LT

Answer of Juan Antonio

I bought it for the daywa fuego 4000lt reel and it is the same but this spool does not have the hole for the central axis bearing and you would have to remove the bearing every time you want to use it otherwise it is the same and works well.

Yo la compré para el el carrete daywa fuego 4000lt y es igual pero está bobina no trae el hueco del rodamiento del eje central y tendrías que sacar el rodamiento cada vez que quieras utilizarla por lo demás es igual y funciona bien.

Answer of Manuel

I don´t think so. This universal coil is compatible only with low-end reels (crossfire, ninja, revros, legalis..... I know from experience.) With the fire model that is of a higher category than those mentioned above, this universal coil is NOT compatible , so I imagine that the Certate, which is still of a higher range, will not be either.

No creo. Esta bobina universal es compatible solo con los carretes de gama baja (crossfire, ninja, revros, legalis..... lo se por experiencia.) Con el modelo fuego que es de categoria superior a los mencionados anteriormente esta bobina universal NO es compatible, así que me imagino que el Certate que todavia es de una gama mas superior tampoco lo será.

Answer of Masoni Luca

You have to take the same size as your reel, in your case 3000

Devi prendere la stessa misura del tuo mulinello, nel tuo caso 3000

Answer of Manuel

The lt 3000 universal coil fits perfectly on the Daiwa Ninja lt 3000 (I have one and no problems)

La bobina universal lt 3000 se ajusta perfectamente al Daiwa Ninja lt 3000 (yo tengo uno y sin problemas)

Answer of francesco

it should be compatible with all 6000 lt models

dovrebbe essere compatibile con tutti i modelli lt 6000

Answer of Aliaksandr

I took it for Prorex V 3000C - it didn’t fit, I don’t know for Exceler.

Я брал для Prorex V 3000C - не подошла, для Exceler не знаю.

Answer of Arild

No, unfortunately only 2000 and 2500 fit

Nei dessverre passer bare 2000 og 2500

Answer of Olga

If it´s LT, in principle yes.

Se for LT, em princípio sim.

Answer of Manuel

This universal coil is compatible with the following models: Revros, Ninja, Legalis, Laguna, Crossfire. I don´t know with other models, the only thing I know is that with the FUEGO model IT IS NOT COMPATIBLE.

Esta bobina universal es compatible con los siguientes modelos: Revros, Ninja, Legalis,Laguna, Crossfire. Con otros modelos no lo sé, lo único que sé es que con el modelo FUEGO NO ES COMPATIBLE.

Answer of tatsuya

It cannot be used for Fuego. Adapts to Ninja, Legalis, and Revros.

It cannot be used for Fuego. Adapts to Ninja, Legalis, and Revros.

Answer of francesco

Yes, they are compatible with all LT models, I bought one for the daiwa caldia LT 5000.

Si sono compatibili con tutti i modelli LT, io ne ho acquistata una per il daiwa caldia LT 5000.

Answer of Manuel

The Daiwa Universal LT spool is compatible, in its different sizes, with the LAGUNA, REVROS, NINJA and LEGALIS models. BEWARE, IT IS NOT COMPATIBLE WITH THE DAIWA FUEGO.

La bobina Daiwa Universal LT es compatible, en sus distintos tamaños, con los modelos LAGUNA, REVROS, NINJA y LEGALIS. OJO, NO ES COMPATIBLE CON LOS DAIWA FUEGO.

Answer of Manuel

The Daiwa Universal LT spool is compatible, in its different sizes, with the LAGUNA, REVROS, NINJA and LEGALIS models. BEWARE, IT IS NOT COMPATIBLE WITH THE DAIWA FUEGO.

La bobina Daiwa Universal LT es compatible, en sus distintos tamaños, con los modelos LAGUNA, REVROS, NINJA y LEGALIS. OJO, NO ES COMPATIBLE CON LOS DAIWA FUEGO.

Answer of gerardo

Hello, Unfortunately no !! I also thought it was compatible, since I can´t find anything for the x lt series that mounts a bushing on the shaft and this coil is not prepared. Maybe the red ballistic lt ones will be fine, but I wouldn´t risk it. Regards

Ciao, Purtoppo no!! Anche io pensavo fosse compatibile , poiche´ non trovo nulla per la serie x lt che monta una boccola sull´alberino e questa bobina non e´ predisposta. Forse andranno bene quelle x il ballistic lt rosse, ma non rischierei.saluti