Dive Rite Mariner 65 16´´ & Elbow Wing

The Mariner Wing concept moves away from traditional design and focuses on optimizing the balance point to offer an extremely stable and easy-to-dive platform.

The Mariner 65 is specifically designed for 204 mm steel double cylinders, with capacity to carry multiple stages and decompression bottles.

The Mariner´s extra-wide oval shape completely wraps the sides of the cylinders to just below their tops, which positions buoyancy higher in the water relative to cylinder weight.

The result is significantly greater stability and a considerably more balanced experience in the water.

Mariner´s curved sides hold gas at the highest point of the arch throughout the trim range.

This allows divers to remain in a horizontal trim at any angle they desire without feeling their wing push them in one direction or another.

The Mariner´s center panel is wide enough to accommodate a standard metal backplate without the air cell or zipper being pinched against the cylinder wall.

The width of this panel also serves to push gas to the sides of the cylinders where it is most stable, rather than underneath them.

The Mariner model is constructed from tough 1680 ballistic nylon, with panels incorporating SuperFabric® brand technology for increased protection and abrasion resistance in high-wear areas.

It is available with the diver´s choice of:

inflator valve or elbow, and with 12 or 16-inch corrugated inflator hoses.

It includes two 1-inch x 3-inch grommets for increased flexibility in hose routing and organization.

Made in the U.S.A.

TECHNICAL SPECIFICATIONS.

Weight:

1.2 kg.

Lift Capacity:

29.5 kg.

Dimensions:

61 cm Length x 84 cm Width.

Outer Chamber Material:

1680 Denier Heavy Duty Ballistic Nylon with SuperFabric® Brand Technology Side Panels.

Inner Chamber Material:

210 Denier Heavy Duty Laminated Nylon.

With 16" inflator and corrugated hose