Salvimar Mares Extension Vuoto Vacuum muzzle

Answer of Abel Abraham

Based on my experience, I suggest you check the piston number on your speargun. I tried to install it on a Mares Jet 56, but it wasn´t compatible. In the end, I had to buy the number 13. The piston number is specified in the manual, or if you prefer, you can disassemble your speargun to check the piston number. The head is easily replaced; just unscrew it and insert the new one. Just be careful, because if you haven´t maintained your speargun for a long time, it´ll likely be a bit difficult to unscrew. I hope this information is helpful. Best regards.

Basado en mi experiencia, te sugiero que revises el numero del piston de tu arpon. Yo quise ponerselo a un mares jet 56 y no fue compatible, al final tuve que comprar el numero 13. El numero del piston lo especifica en el manual o si quieres puedes desarmar tu arpon para verificar el numero del piston. El cabezal se cambia facilmente, solo es desatornillar y poner el nuevo. Solo debes tener cuidado, ya que si no le has dado mantenimiento a tu arpon por un largo tiempo es muy probable que te cueste un poco de trabajo desatornilllarlo. Espero te sirva la información. Saludos

Answer of Luz Andrea

Yes, it is compatible with your Mares Sten. If you buy this version, you don´t need to buy anything else. I recommend buying Cressi brand silicone grease.

Si, es compatible con tu mares sten,si compras esta versión no necesitas comprar nada más, te recomiendo comprar una grasa siliconada marca cressi.

Answer of Mariano

I mounted it on Spark 11 rod without any problems

Io l’ho montato su Spark canna 11 senza problemi

Answer of Luz Andrea

Yes, it´s compatible with Mares Cirano 1.1 and 1.3. You can buy it with complete confidence, buy it without thinking twice. I advise you to buy additional seals and also a Cressi brand silicone grease... I hope I´ve helped you with your question.

Si es compatible para mares cirano 1.1 y 1.3.la puedes comprar con total confianza, comprala sin pensarlo dos veces, te aconsejo que compres chupas adicionales y también una grasa siliconada marca cressi... Espero haberte ayudado con tu pregunta

Answer of Anthony

No it is not suitable for seac you need an adapter

Non il ne convient pas pour seac il faut un adaptateur

Answer of Anthony

Vacuum muzzle for rifles (11 mm barrel). The muzzle can work for rods from 6.5 to 8 mm. The stock muzzle has a standard damping ring for 6.5 and 7mm rods. For other rod diameters, the separate seal code 302001B must be used: https://www.tradeinn.com/diveinn/es/salvimar-acople-vuoto-bushing-damping/138581/p

Muselière à vide pour fusils (canon de 11 mm). La muselière peut fonctionner pour des cannes de 6,5 à 8 mm. La muselière d'origine est dotée d'une bague d'amortissement standard pour les cannes de 6,5 et 7 mm. Pour les autres diamètres de tiges, il faut utiliser le joint séparé code 302001B: https://www.tradeinn.com/diveinn/es/salvimar-acople-vuoto-bushing-damping/138581/p