Bosch PRB3A6B70 Gas Hob 2 burners

Answer of Brendan

This burner is suitable for use with mains gas.

This burner is suitable for use with mains gas.

Answer of Colin

Singapore Town Gas is Hydrogen & Methane. Unfortunately, this hob doesn't seem to support Town Gas. It appears to only support: G20 - Natural Gas (Methane) G25 - Nitrogen & Methane G30 - LPG (Butane) G31 - LPG (Propane) from the Hob installation Manual by Bosch. Please refer to that Manual Figure 23 for confirmation.

Singapore Town Gas is Hydrogen & Methane. Unfortunately, this hob doesn't seem to support Town Gas. It appears to only support: G20 - Natural Gas (Methane) G25 - Nitrogen & Methane G30 - LPG (Butane) G31 - LPG (Propane) from the Hob installation Manual by Bosch. Please refer to that Manual Figure 23 for confirmation.

Answer of Brendan

Hello! My one came with the LPG conversion jets in a separate sealed plastic bag, together with instructions. While I have no direct experience of using LPG, the labelling suggested suitability for both propane and butane operating at 28 mbar. The instructions indicated the jet marked 83 should be installed in the larger of the two burners and the one marked 75 in the smaller burner. The jets in my pack were marked 83 and 70, whether the inclusion of the 70 jet was in error or it [the 70] would work satisfactorily in the smaller burner, I cannot say. I hope this is of assistance.

Hello! My one came with the LPG conversion jets in a separate sealed plastic bag, together with instructions. While I have no direct experience of using LPG, the labelling suggested suitability for both propane and butane operating at 28 mbar. The instructions indicated the jet marked 83 should be installed in the larger of the two burners and the one marked 75 in the smaller burner. The jets in my pack were marked 83 and 70, whether the inclusion of the 70 jet was in error or it [the 70] would work satisfactorily in the smaller burner, I cannot say. I hope this is of assistance.

Answer of Colin

This document: https://media3.bosch-home.com/Documents/8001285214_A.pdf contains the answers to all your questions.

This document: https://media3.bosch-home.com/Documents/8001285214_A.pdf contains the answers to all your questions.

Answer of Colin

I couldn't say for sure since the US may have different requirements for NG or ULPG, but this document: https://media3.bosch-home.com/Documents/8001285214_A.pdf should contain the answers.

I couldn't say for sure since the US may have different requirements for NG or ULPG, but this document: https://media3.bosch-home.com/Documents/8001285214_A.pdf should contain the answers.

Answer of Brendan

The warranty is a two year parts and labour warranty, you must register the product on the Bosch website.

The warranty is a two year parts and labour warranty, you must register the product on the Bosch website.

Answer of Colin

Yes, 2 years

Yes, 2 years

Answer of Alick

Very nice hob. Works well. Pretty easy to install. I used 2mm stainless steel sheet because the hole I was fitting into was far too big. The cable is bare, so fit your own plug - so UK 3-pin is ok. You may have to change the gas nozzles, depending on the gas type used.

Very nice hob. Works well. Pretty easy to install. I used 2mm stainless steel sheet because the hole I was fitting into was far too big. The cable is bare, so fit your own plug - so UK 3-pin is ok. You may have to change the gas nozzles, depending on the gas type used.

Answer of chananel

I dont remember, I had a technician to connect the gad here in the UK

I dont remember, I had a technician to connect the gad here in the UK

Answer of DANILO

Hi, you must specify this when ordering, otherwise the methane version will arrive (with the nozzles for LPG in the package but to be changed during installation by Bosch assistance for a fee)

Salve, deve specificarlo all'ordine, altrimenti arriva la versione per metano (con gli ugelli per il GPL nella confezione ma da far cambiare durante l'installazione dall'assistenza Bosch a pagamento)

Answer of Richard

I use bottled gas with mine (not sure if thats propane? - it´s in the yellow bottles familiar at every garage/shop). The pan support piece is heavy but freestanding-it´s only held in place by gravity. If you went over a dramatic bump it could dislodge. A matter of seconds to realign it, but you´d need to secure it in some way, or put a lid over hte hob when not in use.

I use bottled gas with mine (not sure if thats propane? - it´s in the yellow bottles familiar at every garage/shop). The pan support piece is heavy but freestanding-it´s only held in place by gravity. If you went over a dramatic bump it could dislodge. A matter of seconds to realign it, but you´d need to secure it in some way, or put a lid over hte hob when not in use.

Answer of DANILO

Hi, it runs on methane and has nozzles for LPG but you must specify when purchasing which type of gas you use, otherwise you will have to call Bosch assistance to change the nozzles.

Salve, funziona a Metano ed ha gli ugelli per il GPL ma deve specificarlo all´acquisto che tipo di gas utilizza, altrimenti dovrà chiamare l´assistenza Bosch per il cambio ugelli.

Answer of DANILO

Hello, the ignition is electric. The piano must be connected to the home system.

Salve, l´accensione è elettrica. Il piano deve essere collegato all´impianto di casa.