Cannondale Garmin Varia eRVR315 SmartSense proximity sensor

Answer of Kevin

If you have a SmartSense-enabled bicycle, they connect either to the wire coming out of the bicycle, or to the light itself, which has one connection on both the left and right, behind the light itself. Mounting hardware is NOT included: HINDSITE ARRAY RADAR CONNECTION BRACKET (K76641). OR Garmin universal mount https://www.tradeinn.com/bikeinn/en/garmin-aero-varia-quarter-turn-rear-light-support/13559575/p

If you have a SmartSense-enabled bicycle, they connect either to the wire coming out of the bicycle, or to the light itself, which has one connection on both the left and right, behind the light itself. Mounting hardware is NOT included: HINDSITE ARRAY RADAR CONNECTION BRACKET (K76641). OR Garmin universal mount https://www.tradeinn.com/bikeinn/en/garmin-aero-varia-quarter-turn-rear-light-support/13559575/p

Answer of Kevin

No, the bicycle mount for under the seat is NOT included: HINDSITE ARRAY RADAR CONNECTION BRACKET (K76641).

No, the bicycle mount for under the seat is NOT included: HINDSITE ARRAY RADAR CONNECTION BRACKET (K76641).

Answer of Kevin

It would not, as SmartSense was introduced in 2022. In theory, you could retrofit your bicycle through installing the components into the frame, but I would not recommend doing so since there are other products that Cannondale sells that can be added to the bicycle. The only downside is that these charge separately, but it would be much easier than trying to drill into your bicycle to retrofit this the SmartSense system.

It would not, as SmartSense was introduced in 2022. In theory, you could retrofit your bicycle through installing the components into the frame, but I would not recommend doing so since there are other products that Cannondale sells that can be added to the bicycle. The only downside is that these charge separately, but it would be much easier than trying to drill into your bicycle to retrofit this the SmartSense system.