Dmr DeathGrip 2 Thin grips

We took everything we learned from making and riding the original Deathgrip and created the Deathgrip2. Having spent years refining grip design with Brendan Fairclough, Olly Wilkins and the DMR Team, along with riders from around the world at all levels, we knew we were on to a winning formula. We kept the features that riders know and love, and added some fundamental improvements along the way.

The DMR Deathgrip2 features the grip pattern and layout that inspired a whole generation of mountain bike grips: it starts with a soft mushroom section for comfort in the thumb and forefinger area, preventing blisters in a soft-tissue zone. Next, the grip pattern features diamond knurl for grip in all conditions and all terrains: and the waffle layout underside holds your fingers in the perfect position for grip and control. A tapered core means the Deathgrip is firmly mounted onto your handlebars with ease and the use of just one lockring keeps things simple and tight. The krayton rubber grip compounds we use are soft and comfortable, yet durable and lightweight. Select thin or thick diameters, and with or without flanges: the choice is yours.

We took the winning features of the Deathgrip, and then added:
- An exposed core end for added durability for when the going gets rough.
- A new injection-moulded DMR end cap for added branding and colour coordination.
- The all-new DMR Deathgrip2 collar lock-ring is now slimmer, more refined, and more integrated with the grip outer.
- The flanges are now slimmer with a new relief design and fresh DMR logo.
- Millimetre-perfect positioning of mushroom, waffle, and knurl for the ultimate grip pattern.

The Deathgrip2 Race grip is made from a super-soft krayton compound for extra comfort and control.

Deathgrip2s are designed for optimal grip, comfort and control whether you ride with or without gloves. They’re the perfect choice for every rider: for weekend thrashers, dedicated freeriders, or whether you race Hardlines, World Cups, or ride Rampages. Deathgrip2s are the grip of choice for everyone.

Features:

- Tapered Core: No Need For Outer Lockring, With A Secure Hold.
- Waffle: For Comfortable Finger Placement And Confident Grip.
- Knurl: For All Over Grip In All Conditions.
- Mushroom: For Comfort In Thumb And Forefinger Area.
- Flange Or Flangeless: For Your Preferred Grip Setup.
- Tapered core for secure fit
- Soft krayton rubber outer
- Exposed plastic core for durability
- Injection molded DMR logo end cap
- Slimline aluminium lock-ring collar
- Original Deathgrip remains available in the DMR range

Additional Info:

Installation:

Please follow these instructions carefully to install your new DMR Deathgrips:
- Remove your old grips and bar end plugs.
- Thoroughly clean and degrease the handlebar.
- Ensure there is at least 130mm of free bar space for each grip. If necessary, move your controls to create the required space.
- Fit the new DMR Deathgrips onto the handlebar by pushing them on all the way until they won´t go any further. You may need a soft faced mallet or similar to tap them on to fully engage the unique taper-end of the Deathgrip.
- Make sure the collars are fully located on the grips
and tighten the collar bolts to torque (2nm). Do not overtighten the collar bolts, only tighten them enough that the grips will not rotate under force.
- Confirm that the grips and controls are securely in = place. Twist the grips hard to ensure they do not move.

Specifications:

- Compounds: 20A durometer
- Single lock-ring bolt – torque to 2Nm
- Compound: Choose Soft 20a For All-terrain Riding, Gum In 25a, Or Super-soft Race Compound In 15a Durometer.
- Option: Thin
- Lightweight: Just 100g