Magura HS33 R brakes

Answer of Paul

29-inch rims are no problem as long as the frame has fixed mounting nipples for this system. Frames are prepared for Magura brakes.

29 inch velg is geen probleem als het frame maar vaste montage nippels heeft voor dit systeem. Frames zijn voorbereid op magura remmen.

Answer of brendan

Yes the brakes fit on a 29 inch big flyer i got these for my big ripper 29 inch

Yes the brakes fit on a 29 inch big flyer i got these for my big ripper 29 inch

Answer of Christian

Both. There are no right or left levers

Sowohl als auch. Es gibt keine Rechts- oder Linkshebel

Answer of Aleksey Aleksandrovitch

Length is about 2000mm

Length is about 2000mm

Answer of Aleksey Aleksandrovitch

All included for installation instead of v-brakes/canti

All included for installation instead of v-brakes/canti

Answer of Iain

This is a full 1 wheel kit with all Evo2 parts to fit either front or back wheel with the lever on left or right side of the bar. It even includes parts to shorten the hose once.

This is a full 1 wheel kit with all Evo2 parts to fit either front or back wheel with the lever on left or right side of the bar. It even includes parts to shorten the hose once.

Answer of William

As long as you have brake posts on your seat stays for v brakes or cantis the brake is ready to mount. The one thing that you might have to do is shorten the brake line as it's plenty long or figure a way to wrap it ala dj bike style

As long as you have brake posts on your seat stays for v brakes or cantis the brake is ready to mount. The one thing that you might have to do is shorten the brake line as it's plenty long or figure a way to wrap it ala dj bike style

Answer of Julio

You don´t need to buy anything. They even come complete with the olive to reassemble after cutting the hose. If they are cut carefully, there is no need to purge or fill with oil, just install the olive and tighten.

No hace falta comprar nada. Vienen completos incluso con la oliva para volver a montar después de cortar el latiguillo. Si se cortan con cuidado no hace falta purgar ni rellenar con aceite, sólo instalar la oliva y apretar.

Answer of WON JUN

Every components are already assembled, brake line is super long, you have to shorten it or wrap around about 2 times. It's pre-bleed.

Every components are already assembled, brake line is super long, you have to shorten it or wrap around about 2 times. It's pre-bleed.

Answer of William

the brakes are complete and filled with fluid and ready to go. The line is definitely long enough and may need to be shortened for a clean look.

the brakes are complete and filled with fluid and ready to go. The line is definitely long enough and may need to be shortened for a clean look.

Answer of Julio

It comes pre-assembled but the lines will be too long and you will have to cut them to the size of your bike. It´s simple and you don´t need to bleed anything, on YouTube you have official Magura videos explaining how to cut them. The connector and olive that you will need to reassemble the lines after cutting them are included with the HS33. It is long enough for the rear brake of any bike, maybe not for a tandem.

Viene premontado pero las líneas van a ser demasiado largas y tendrás que cortarlas a la medida de tu bici. Es sencillo y no hace falta sangrar nada, en youtube tienes vídeos oficiales de Magura explicando cómo se cortan. El conector y la oliva que vas a necesitar para volver a montar las líneas después de cortarlas vienen incluidos con los HS33. Es suficientemente larga para el freno trasero de cualquier bici, quizá no para un tándem.

Answer of Julio

Yes, they come complete. Even with op necessary to shorten the hoses and reassemble them. You don´t need to buy anything else. I don´t know your bike, but if it has flat handlebars and a v-brake or cantilever you shouldn´t have any problems.

Sí, vienen completos. Incluso con op necesario para acortar las mangueras y volver a montarlas. No hace falta comprar nada más. No conozco tu bicicleta, pero si lleva manillar plano y v-brake o cantilever no deberías tener problemas.

Answer of Glenn

These brakes are hydraulic, not cable. They use a hose. The kit comes with everything you need to install.

These brakes are hydraulic, not cable. They use a hose. The kit comes with everything you need to install.

Answer of William

Yes it includes the brake line for the fluid

Yes it includes the brake line for the fluid

Answer of john

Yes, its not a cable but a hydraulic hose.

Yes, its not a cable but a hydraulic hose.

Answer of Chien Hsi

Yes, it is all included.

Yes, it is all included.

Answer of Iain

I've just done a quick google of "Wu Tang core line". All versions of that bike appears to have Calliper brakes that use a single central mounting point above each wheel. These Magura brakes require a pair of cantilever brake bosses mounted to the frame and fork on both sides of the wheel. If you really wanted to, you could take the bike to a frame builder they might be willing to weld some brake bosses on for you, then repaint it. In short: No.

I've just done a quick google of "Wu Tang core line". All versions of that bike appears to have Calliper brakes that use a single central mounting point above each wheel. These Magura brakes require a pair of cantilever brake bosses mounted to the frame and fork on both sides of the wheel. If you really wanted to, you could take the bike to a frame builder they might be willing to weld some brake bosses on for you, then repaint it. In short: No.

Answer of Chien Hsi

It is a whole set of hydraulic brake, as in the picture. 2-finger lever blade, and standard brake pad.

It is a whole set of hydraulic brake, as in the picture. 2-finger lever blade, and standard brake pad.

Answer of Chien Hsi

It is a single pair brake part, and since the brake lever can be reversed and installed on both sides, it can be installed with front or rear wheels.

It is a single pair brake part, and since the brake lever can be reversed and installed on both sides, it can be installed with front or rear wheels.

Answer of Oleksii

I received only a handle, without the brake itself with pads ...

Мне пришла только ручка, без самого тормоза с колодками...

Answer of Zoltan

Yes it does, everything is included

Yes it does, everything is included

Answer of Edward

Hi, you may have to do your own research, but I believe that BMX bikes use a different mounting than mountain bikes. In general, bmx bikes use a U-brake which has caliper arm mounts that are located "above" the rim. Mountain bikes on the other hand use caliper arm mounts that are located "below" the rim. If you study some pictures of the two, it doesn´t take long to recognize the differences. Hope this helps.

Hi, you may have to do your own research, but I believe that BMX bikes use a different mounting than mountain bikes. In general, bmx bikes use a U-brake which has caliper arm mounts that are located "above" the rim. Mountain bikes on the other hand use caliper arm mounts that are located "below" the rim. If you study some pictures of the two, it doesn´t take long to recognize the differences. Hope this helps.