Shimano Flat Mount 160 mm To Flat Mount 180 mm disc brake caliper adapter

Answer of Mauricio

Hello, yes, for a 180 mm disc adapter, I have one like this installed, regards

Buenas si , para adaptador de disco a 180 mm , yo tengo tengo uno igual instalado , saludos

Answer of David

Hello, the adapter only fits Shimano brakes (front or rear) (Slx, XT, XTR, Ultegra, 105, GRX, Dura Ace...) flat mount version that normally come mounted on road or gravel bikes. For mountain bikes etc. the brakes use another type of adapter, normally longer.

Olá, o adaptador só dá para travões(frente ou trás) da Shimano( Slx,XT,XTR, Ultegra, 105, GRX,Dura Ace...) versão flat mount que normalmente vêm montados em bicicletas de estrada ou gravel. Para bicicletas de montanha etc os travões usam outro tipo de adaptadores, normalmente mais compridos.

Answer of DAVID

Yes correct

Si correcto

Answer of David

Hello, if you have Shimano "flat mount" brakes such as 105, Ultegra, Dura Ace, GRX etc, yes this adapter works perfectly to change from 160mm to 180mm brake discs.

Olá, se tem travões por exemplo "flat mount" da Shimano como 105, Ultegra, Dura Ace, GRX etc, sim este adaptador funciona na perfeição para passar de discos travão de 160mm para 180mm.

Answer of David

Hello, if you have Shimano "flat mount" brakes such as 105, Ultegra, Dura Ace, GRX etc, yes this adapter works perfectly to change from 160mm to 180mm brake discs.

Olá, se tem travões por exemplo "flat mount" da Shimano como 105, Ultegra, Dura Ace, GRX etc, sim este adaptador funciona na perfeição para passar de discos travão de 160mm para 180mm.

Answer of David

Hello, yes there is no problem, with this adapter you have calipers with a 160mm disc and by using this adapter you can start using 180mm discs without any problem.

Olá, sim não há problema, com este adaptador se tem pinças com disco 160mm e metendo este adaptador pode passar a usar discos de 180mm sem problema.

Answer of David

Yes it is compatable. I have the Tarmac SL7 DI2 105 with a rear 140mm brake rotor, put this adapter between the frame and the brake caliper and mount a 160mm rotor and everything works great!

Yes it is compatable. I have the Tarmac SL7 DI2 105 with a rear 140mm brake rotor, put this adapter between the frame and the brake caliper and mount a 160mm rotor and everything works great!

Answer of José Luis

If it is compatible, I made the same change, I had a 140 and I changed it for a 160, it works perfectly. I hope I have clarified your doubt. Greetings, José Luis.

Si es compatible, yo hice el mismo cambio tenía de 140 y lo cambié por uno de 160, funciona perfectamente. Espero haberte aclarado la duda Un saludo, José Luis.

Answer of Juha-Matti

This part does not affect the operation of the gearbox. With this part, you can move the Shimano Ultegra rear brake so that it can accommodate a 160mm brake disc instead of a 140mm brake disc. The transfer is easy and does not require a high level of expertise.

Tämä osa ei vaikuta vaihteiston toimintaan. Tällä osalla pystyt siirtämään Shimano Ultegra takajarrua siten, että siihen mahtuu 140mm jarrylevyn sijasta 160mm jarrulevy. Siirto on helppo, eikä siihen tarvita korkeaa osaamista.

Answer of José Luis

The piece that appears in the photograph is, as you say, a 160 - 180 mm rear adapter. Disk. The front adapter has nothing to do with this one, the other one is longer and they are to be placed independently of the one you say you have, one should not be placed on top of the other. I hope it has been helpful for you. If you look under this E-mail, in related products you will see BONIN 140 front adapter, you would have to find another with that shape, but 160 - 180

La pieza que aparece en la fotografía es como bien dices, un adaptador trasero de 160 - 180 mm. De disco. El adaptador delantero no tiene nada que ver con este, el otro es más largo y son para poner independiente del que dices que tienes, no se debe poner uno encima del otro. Espero que te haya servido de ayuda. Si miras debajo de este E-mail, en productos relacionados verás de BONIN Adaptador delantero de 140, tendrías que encontrar otro con esa forma, pero de 160 - 180

Answer of Nuno

For 180 mm rotor you must use the SM-MA-R180P/S adapter.

Para rotor de 180 mm deves usar o adaptador SM-MA-R180P/S.