Sram Red E1 DUB crank

Answer of NOZOMI

Quark DZero Spider power meter can be fitted with Sram Red E1 DUB cranks When replacing, be careful as the eight bolts are easily broken.

Quark DZero Spider power meter can be fitted with Sram Red E1 DUB cranks When replacing, be careful as the eight bolts are easily broken.

Answer of Johannes

Yes, that´s possible. It´s best to try it out and then see if it´s better to use smaller chainrings.

Ja, moeglich ist das. Am besten ausprobieren und dann schauen, ob es besser ist auch kleinere Kettenblaetter zu nehmen.

Answer of Adam

The last delivery included the screws

Bei der letzten Auslieferung waren die Schrauben dabei

Answer of NOZOMI

Screws not included

Screws not included

Answer of Johannes

Screws are always included with the cranks.

Schrauben sind bei den Kurbeln immer mit dabei.

Answer of NOZOMI

I think it can be installed, but I think the rigidity of the left and right sides will be different.

I think it can be installed, but I think the rigidity of the left and right sides will be different.

Answer of NOZOMI

It has two arms and a DUB spindle Chainrings are not included

It has two arms and a DUB spindle Chainrings are not included

Answer of Johannes

This is the complete crank with DUB spindle.

Es handelt sich um die komplette Kurbel mit DUB-Spindel.

Answer of augusto

From an electronic point of view there are no incompatibilities and not even from a mechanical point of view, the only thing that needs to be checked is the size and type of the bottom bracket that must be compatible. The Dub spindle of the new crankset has a diameter of 28.99 mm and requires a press-fit bottom bracket with a bottom bracket shell width of at least 86 mm.

Da un punto di vista elettronico non ci sono incompatibilità e neanche da un punto di vista meccanico, l'unica cosa che bisogna verificare è la misura e tipologia del movimento centrale che deve essere compatibile. Il perno Dub della nuova guarnitura ha un diametro di 28,99 mm e necessita di un movimento centrale di tipo press-fit con una larghezza della scatola del movimento centrale di almeno 86 mm.

Answer of Marginean

No, in general Red etap components are not compatible with Red AXS components (new groupset)

No, in general Red etap components are not compatible with Red AXS components (new groupset)

Answer of Georg

The crankset has the DUB standard, i.e. 28.99mm spindle diameter.

La guarnitura ha lo standard DUB cioè 28,99mm di diametro del perno.

Answer of Luciano

the diameter of the axle is 28.9 and the bottom bracket is only one, DUB, then it depends on the type of frame box, the width and the type if PF or threaded

il diametro del perno è 28,9 e il movimento centrale è solo uno, DUB, poi dipende dal tipo di scatola del telaio, dalla larghezza e dal tipo se PF o filettato

Answer of Jens

Yes it is, I ride it on a 2024 Cube CrossRace C:68x SLT with a 38 tooth chainring

Ja ist sie, fahre sie am einem 2024er Cube CrossRace C:68x SLT mit einem 38er Kettenblatt

Answer of Luciano

for the chainring, you need to get a 1x 8 bolt one, as for the axle, I assume so, it´s not a wide crankset, you just need to have the right Dub bottom bracket

per la corona, è necessario prenderne una 1x a 8 bulloni, per quanto riguarda ll'asse, presumo di si, non è una guarnitura wide, basta avere il movimento centrale Dub adatto

Answer of Ole

Yes, you will need the appropriate DUB BSA bottom bracket. This is supplied with the correct savers.

Ja, du brauchst dann das passende DUB BSA Tretlager. Dieses wird mit den richtigen Sparern geliefert.

Answer of Phill

Hi. Yes I have mine mounted on a 68mm road frame and running a 1 x Garbaruk chainring. Works (and looks) really well.

Hi. Yes I have mine mounted on a 68mm road frame and running a 1 x Garbaruk chainring. Works (and looks) really well.

Answer of Stefan

Yes, the axle is compatible with a 68mm case and a single chainring. Pay attention to the choice of the ´bottom bracket´, the ´cups´ must be on the outside of the 68mm case. Good luck!

Ja, de as is compatibel met een 68mm kast en een enkel kettingblad. Let op de keuze van de 'bottom bracket', de 'cups' moeten aan de buitenzijde van de 68mm kast. Succes!

Answer of Adam

It looks like the 165mm is currently sold out. At least they are no longer available. I had to wait a few months last year too.

Es schaut so aus, dass die 165mm momentan ausverkauft sind. Zumindest sind die nicht mehr verfügbar. Ich habe im letzten Jahr auch einige Monate warten müssen.

Answer of Kanstantsin

Refer to the drop-down menu.

Refer to the drop-down menu.

Answer of Rufino

165 are sold out says

165 están agotadas pone

Answer of Timothy

They are available in different lengths from 165 to 175 mm in 2.5 mm increments. You choose the length from the menu before adding it to the basket.

Están disponibles en diferentes longitudes de 165 a 175 mm en incrementos de 2,5 mm. Eliges el longitud en el menú antes de añadirlo al cesta