ASSO Casting 200 m fluorocarbon

The diameter in the image may differ.

Refer to the size selector for the correct size.

Rimpact Pro is our group test winning, 5 star reviewed insert.

It utilises an innovative dual density design with a dense protection shell that helps dissipate extreme forces.

It works in combination with our classic Original foam that cuts vibration and locks beads in place.

Crafted from high-quality closed cell foam, the Rimpact Pro is engineered for maximum performance gain, allowing you to run lower pressures without the negative associated effects like rim damage, flats, and lack of support.

Its unique design provides unbeatable impact absorption, reducing the risk of tyre damage and giving you the confidence to tackle any line with confidence.

Rimpact must be used in conjunction with an insert compatible valve design.

Use about 25% more sealant than recommended on the bottle to ensure the extra surface area of the insert is coated with plenty of fluid to spare.

Our inserts are closed cell and cannot absorb liquid however some sealant will cling to the outside of the insert requiring a slightly higher dosage.

It can be injected through Rimpact Valves but is best poured directly into the tyre.

Disclaimer:It is not advised to run air pressures outside that of the tyre manufacturers recommendations.

Failure to do so may result in injury or the premature failure of the bicycle.

Rimpact does not accept any responsibility for misuse of the Rimpact insert or improper installation.

Specifications:- Size:24´´ - Rimpact 44mm - 50mm Wide - 6mm Pro Layer - Compatible with 2.35” -2.6” Tyres - Compatible with 23mm – 35mm Rims In the box:- 2x Pro V1 Tyre Inserts - 2x 44mm, 55mm Rimpact Insert Compatible Valves or Peaty’s Valves - 4x Die Cut Rim Sticker