Garmin Bronze For Echo

Bronze for Echo is a Garmin transducer made of brown with the main characteristic that it works properly for installation in fiberglass and wooden hulls, and it also works properly at high speeds.

This 8 pin, has a depth of 900 feet, has an operating frequency of 77/200 kHz, a beamwidth of 45/15 degrees, and an 8 to 15 degree dead chip.

The electronic device is 900 feet deep. The packaging is equipped with instructions for installation

Our bronze thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and wood hulls.

An excellent choice for fiberglass and wood hulls, this 8-pin 500 W transducer has a depth of 900 ft; an operating frequency of 77/200 kHz; a beamwidth of 45/15 degrees; and a 8 to 15 degree deadrise.

Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

*Do not use on metal hulls. When using with the echo series, a transducer adapter cable is required.


Compatible Devices:

echo 100
echo 101
echo 150
echo 151
echo 151dv
echo 200
echo 201
echo 201dv
echo 300c
echo 301c
echo 301dv
echo 500c
echo 501c
echo 550c
echo 551c
echo 551dv
echoMAP 50dv
echoMAP 50s
echoMAP 70dv
echoMAP 70s