Campagnolo Freehub freehub body 17 mm

Answer of Moshe

This freewheel is for a specific wheel (actually a family of wheels) made by comapgnolo and fulcrum so it will not fit. Are you sure you are installing the cassette sprockets correctly? Maybe you have a spacer install on your trainer freewheel for a 10 speed which you need to slide out before installing the 11 speed? You should contact your trainer support line for help

This freewheel is for a specific wheel (actually a family of wheels) made by comapgnolo and fulcrum so it will not fit. Are you sure you are installing the cassette sprockets correctly? Maybe you have a spacer install on your trainer freewheel for a 10 speed which you need to slide out before installing the 11 speed? You should contact your trainer support line for help

Answer of Antonio

I use it with Zonda 11 speeds. I think it should work with WTOs. The bearings are inside.

Je l'utilise avec des Zonda 11 vitesses. Je pense qu'avec des wto ça devrait fonctionner. Les roulements sont à l'intérieur.

Answer of Börje

I have put this Free hub on Fulcrum racing quattro and it works great! Easy to change yourself. Changed from hub adapted for Campa cassette, now have Shimano Ultegra 11-speed.

Jag har satt denna Free hub på Fulcrum racing quattro och det fungerar utmärkt! Enkelt att byta själv. Bytte från hub anpassad för Campa-kassett, har nu Shimano Ultegra 11-speed.

Answer of Antonio

The pads must be compatible with your rims. You must check that the pads are suitable for carbon rims. The cassette is compatible with 11 speeds. You must especially check if it is compatible with your wheels.

C'est les patins qui doivent être compatibles avec vos jantes. Il faut vérifier que les patins soient adaptés aux jantes carbone. Pour la cassette elle est compatible 11 vitesses. Il faut surtout voir si elle est compatible avec vos roues.

Answer of Börje

It is compatible with Shimano 11 speed.

Den är kompatibel med Shimano 11 speed.

Answer of Antonio

Hello, Shimano and Campagnolo are two different systems. The cassette spacing is different, as well as the machining of the cassettes, the chain links, etc. So I would say the lockrings are different. Cdt

Bonjour Shimano et Campagnolo sont deux systèmes différents. L'étagement des cassettes est différent, ainsi que l'usinage des cassettes, les maillons de chaîne, etc. Je dirais donc que les bagues de verrouillage sont différentes. Cdt

Answer of Antonio

For 9, 10, 11 speed cassettes only

Pour cassettes 9, 10, 11 vitesses seulement

Answer of Antonio

It works with 11 speed Zondas, it should be ok with 9, 10, 11 speed khamsins.

Ça fonctionne avec des Zonda 11 vitesses, ça devrait être ok avec des khamsin 9, 10, 11 vitesses.

Answer of Cristian

Hi ! It will fit only if your Khamshin wheels have 17 mm axle. You have to dismount your freehub and measure the axle, or measure de inner diameter of the cassette bearing. Only the 17 mm measurement will fit !

Hi ! It will fit only if your Khamshin wheels have 17 mm axle. You have to dismount your freehub and measure the axle, or measure de inner diameter of the cassette bearing. Only the 17 mm measurement will fit !

Answer of Antonio

I mounted it on a Campagnolo Shamal Ultra (17mm axle) and it is the same freehub that the Campagnolo Bora uses, so it should work. Manufacturer reference: FH-BO015X1 (for Shamal and Bora from 9 to 11 speeds)

Yo lo monté en una Campagnolo shamal ultra (eje de 17mm) y es el mismo núcleo que monta la Campagnolo Bora, por lo tanto debería de valer. Referencia según fabricante: FH-BO015X1 (para Shamal y Bora de 9 a 11velocidades)

Answer of Yuuki Yamamoto

Hola. Es importante que nos indique a que ruedas se lo quiere montar.

Hola. Es importante que nos indique a que ruedas se lo quiere montar.

Answer of Craig

Hi this freehub is for shimano/sram cassettes but is sized internally (17mm) to fit the axle diameter of a campag wheel. I used it on a khamsin wheel with a shimano cassette. A freehub for a campag cassette has deeper splines in comparison.

Hi this freehub is for shimano/sram cassettes but is sized internally (17mm) to fit the axle diameter of a campag wheel. I used it on a khamsin wheel with a shimano cassette. A freehub for a campag cassette has deeper splines in comparison.

Answer of Dave

This freehub is only for Shimano/Sram groupsets and will not work with Campagnolo. It is not possible to fit a campy cassette on this freehub. I have Bora WTO wheels with Shimano Dura-Ace, and therefore have used this freehub. If you have a campy drivetrain, you need a different freehub.

This freehub is only for Shimano/Sram groupsets and will not work with Campagnolo. It is not possible to fit a campy cassette on this freehub. I have Bora WTO wheels with Shimano Dura-Ace, and therefore have used this freehub. If you have a campy drivetrain, you need a different freehub.

Answer of Antonio

Perfect Campagnolo 11v parity with Shimano cassette

Perfecta parquedad Campagnolo de 11v con Casette Shimano

Answer of Moshe

Should be. It is pretty interchangable. It fits both my compy eurus and compy shamal mille. If you are using shimano hyperglide it should work

Should be. It is pretty interchangable. It fits both my compy eurus and compy shamal mille. If you are using shimano hyperglide it should work

Answer of Antonio

Perfect and compatible with Shimano and 11v cassette

Perfecto y compatible con Shimano y casete 11v

Answer of Moshe

Yes, it takes on Shimano cassettes (I have installed an ultegra 11 speed cassette on it)

Yes, it takes on Shimano cassettes (I have installed an ultegra 11 speed cassette on it)

Answer of Delmotte

No, for 11s, yes it works.

Non pour du 11s la oui ça fonctionne.

Answer of ANTONIO JESUS

no

no

Answer of ANTONIO JESUS

SIRIVE PARA SRAM RED 24 V

SIRIVE PARA SRAM RED 24 V

Answer of ANTONIO JESUS

Hello, yes, it is compatible with Scirocco DB

Hola si , es compatible con Scirocco DB

Answer of NOZOMI

Compatible with SCIROCCO DB

Compatible with SCIROCCO DB

Answer of ANTONIO JESUS

Hello, if it is correct, I bought it for a wto 60 mm disc from June 2023

hola si es correcto yo lo compre para unas wto 60 mm disco de junio 2023

Answer of Delmotte

Good for my neutron in shimano 11v groupset

Bon pour mes neutron en groupe shimano 11v

Answer of BITKE

If it is compatible

Si es compatible

Answer of Dave

Yes, I installed on a Bora WTO 45 Disc. BTW an issue with this freehub is that it doesn't have an outside bearing seal. If you ride in the rain, water will get in and rust the bearings (this happened to me on 2 bikes). When you install the freehub, add extra grease over the outer bearing to prevent water penetrating.

Yes, I installed on a Bora WTO 45 Disc. BTW an issue with this freehub is that it doesn't have an outside bearing seal. If you ride in the rain, water will get in and rust the bearings (this happened to me on 2 bikes). When you install the freehub, add extra grease over the outer bearing to prevent water penetrating.

Answer of Delmotte

Excellent for my neutron with my shimano 105 11v r7000 group good product

Excellent pour mes neutron avec mon groupe shimano 105 11v r7000 bon produit

Answer of NOZOMI

cannot be used, only genuine 3T can be used.

cannot be used, only genuine 3T can be used.

Answer of Beegi

This should fit in your zonda wheels. So you can use a shimano cassette.

This should fit in your zonda wheels. So you can use a shimano cassette.

Answer of Johan

Hello yes it is suitable for the Campagnolo Zonda wheel. This is the one I have and it went without problem. Great deal

Bonjour oui il convient pour la roue campagnolo zonda. C´est celle que j´ai et c´est passé sans problème. Bon achat

Answer of Yuri

Полагаю, что данный хаб подойдет к Зонда. Главное, проверьте диаметр вала - 17мм. Снимается хаб легко, следует лишь открутить одну гайку с обратной (левой) резьбой и одновременно нажать на три собачки храповика.

Полагаю, что данный хаб подойдет к Зонда. Главное, проверьте диаметр вала - 17мм. Снимается хаб легко, следует лишь открутить одну гайку с обратной (левой) резьбой и одновременно нажать на три собачки храповика.

Answer of Borja

Hello. If it is a 17mm axle you shouldn´t have a problem.

Hola. Si es eje de 17mm no tendrias que tener problema.

Answer of Carsten Weiss

Yes, it fits all fulcrums with a 17 mm shaft. Can be used tiæ 10 speed with shim behind cassette

Ja det passer til alle fulcrum med 17 mm aksel. Kan bruges tiæ 10 speed med shim bag casette

Answer of Borja

Hello. Yes it works for you, but you need a separation washer.

Hola. Si te sirve, pero necesitas uns arandela de separacion.

Answer of Daniele

The cassette is for Campagnolo wheels and Shimano 10-11 speed cassette

La cassetta è per ruote campagnolo e cassetta shimano 10-11 velocità

Answer of Borja

Hello. If they are relatively modern, it would work for you. Campagnolo FH-BO015X1 Shim./SRAM freewheel body 9/10/11 speed Suitable for: Campagnolo wheels with aluminum axle. Freewheel body: Shimano 9-/10-/11 speed or SRAM 9-/10-/11 speed. Compatibility: Campagnolo Bora One from MY16. Campagnolo Bora Ultra. Campagnolo Shamal Ultra from MY16. Campagnolo Shamal Mille. Campagnolo Zonda DB.

Hola. Si son relativamente modernas si te servira. Campagnolo FH-BO015X1 cuerpo de rueda libre Shim./SRAM 9/10/11 velocidades Adecuado para: Ruedas Campagnolo con eje de aluminio. Cuerpo de rueda libre: Shimano 9-/10-/11 velocidades o SRAM 9-/10-/11 velocidades. Compatibilidad: Campagnolo Bora One de MY16. Campagnolo Bora Ultra. Campagnolo Shamal Ultra a partir del MY16. Campagnolo Shamal Mille. Campagnolo Zonda DB.

Answer of NOZOMI

Does the fact that it comes with N3W mean BORA ULTRA WTO 45 DB? If so, this free body will not fit. The compatible model is FH-HGA33.

Does the fact that it comes with N3W mean BORA ULTRA WTO 45 DB? If so, this free body will not fit. The compatible model is FH-HGA33.

Answer of NOZOMI

I don´t think it can be replaced.

I don´t think it can be replaced.

Answer of NOZOMI

It is lightly greased We recommend applying soft grease.

It is lightly greased We recommend applying soft grease.

Answer of ANTONIO

If you grease it, very very little, if you grease it a lot you will eliminate the noise from the wheel when you stop pedaling. I like that you know what wheel it is, by the sound of the core.

Si lo engrasas, muy muy poco, como lo engrases mucho le quitas el ruido a la rueda cuando dejas de pedalear. A mi me gusta q se sepa q rueda es, por el sonido del núcleo.

Answer of NOZOMI

Can be attached to campa hyperon one

Can be attached to campa hyperon one

Answer of ANTONIO

It depends on the age of the wheel, it is better to ask Campagnolo or a technician. I´m sorry but I had to exchange two and they were for eurus

Depende de la antigüedad de la rueda, es mejor q preguntes en campagnolo o a algún técnico. Lo siento pero tuve q descambiar dos y fueron para eurus

Answer of Borja

Hello. If it´s a 17mm axle, yes.

Hola. Si es eje de 17mm si.

Answer of Erich

I purchased these for Campagnolo Neutron 17mm axle and also Campagnolo Shamal 2 Way Fit 17mm axle wheels. The 17mm body fit perfectly.

I purchased these for Campagnolo Neutron 17mm axle and also Campagnolo Shamal 2 Way Fit 17mm axle wheels. The 17mm body fit perfectly.

Answer of Borja

Hello. This one in particular is for campagnolo wheels but for shimano cassettes.

Hola. Este en concreto es para ruedas campagnolo pero para casettes shimano.

Answer of ALBERTO

This part is a core, not a bushing. The hub has its bearings. This part installs on the bushing. The old nucleus is extracted and this is placed. It´s simple and you don´t have to do anything else.

Esta pieza es un núcleo, no un buje. El buje lleva sus rodamientos. Esta pieza se instala en el buje. Se extrae en núcleo antiguo y se coloca este. Es sencillo y no hay que hacer nada más.

Answer of NOZOMI

Two sealed bearings are installed

Two sealed bearings are installed

Answer of NOZOMI

This freebody can be installed on WIND 55 DB.

This freebody can be installed on WIND 55 DB.

Answer of NOZOMI

Can be attached to the current Sirocco

Can be attached to the current Sirocco

Answer of NOZOMI

Fits racing zero. Since the end nut and spacer are not included, they will be reused.

Fits racing zero. Since the end nut and spacer are not included, they will be reused.

Answer of ANTONIO

Yes, the freehub is compatible with Shimano and sram cassettes.

Si, el nucleo es compatible con cassette Shimano y sram.

Answer of NOZOMI

Compatible with Bora WTO 45 wheels

Compatible with Bora WTO 45 wheels

Answer of SHINYA

I used it with ZONDA´s Shimano hub, but I think it would be better to check with the manufacturer if it can be used with Fulcrum.

ZONDAのシマノハブで使用しましたが、 フルクラムで使えるかはメーカーに確認された方が良いかと思います。

Answer of NOZOMI

Made of aluminium. The sprocket bites when used for a long period of time.

Made of aluminium. The sprocket bites when used for a long period of time.

Answer of SHINYA

Unfortunately I don´t know if it´s compatible. The "Product Features" column says the original number FH BO015X1, so if this is correct, this freehub is compatible with Shimano cassettes.

互換性があるか残念ながら分かりません。 「製品の特徴」欄に元の番号FH BO015X1、とありますので、これが正しいのでしたら、このフリーハブはシマノ製カセットに対応するものです。

Answer of GUSTAVO G

Hello! You will only know by taking the measurement of your current axis, so that it is also 17mm. The rest, the measurements are the same and lighter than the one that comes standard.

Hola! Solo lo sabrás tomando la medida de tu eje actual, para que sea también de 17mm. El resto, las medidas son iguales y más ligeros que el que viene de serie.

Answer of NOZOMI

It becomes 10 speed with the spacer attached to the free body.

It becomes 10 speed with the spacer attached to the free body.

Answer of Antonio

It is fully compatible, it has a washer to be able to adapt a 10v cassette.

Es totalmente compatible, trae arandela para poder adaptar Casette de de 10v.

Answer of NOZOMI

If you install the included spacer, it can be used as a 10-speed compatible

If you install the included spacer, it can be used as a 10-speed compatible

Answer of ANGEL

This core is compatible only for Shimano and Sram cassette. Therefore, it might only interest you if you are interested in changing the one that comes with the Campagnolo wheel for a Campagnolo cassette for a Shimano or Sram cassette.

Este núcleo es compatible solo para casette Shimano y Sram. Por tanto, solo te podría interesar si estás interesado en cambiar el que trae la rueda Campagnolo para casette Campagnolo por casette Shimano o Sram.

Answer of NOZOMI

Can be installed on zonda Compatible with Shimano 11 speed Light weight as it is made of aluminum

Can be installed on zonda Compatible with Shimano 11 speed Light weight as it is made of aluminum

Answer of ANGEL

This aluminum hub can be adapted to almost all Campagnolo wheels. Now, I don´t know if in your case you have to change the axle. And it weighs only 67 grams. Therefore, it is a good option.

Este buje de aluminio se puede adaptar a casi todas las ruedas Campagnolo. Ahora bien , desconozco si en tu caso hay que cambiar el eje.Y pesa solo 67 gramos.Por tanto, es una buena opción.

Answer of NOZOMI

Compatible with 10 and 11 speed Shimano

Compatible with 10 and 11 speed Shimano

Answer of ANGEL

Basically I don´t think it´s compatible. In my case I have adapted it to Campagnolo bora one wheels with the intention of changing the steel core they had. I also had to buy a new axle and a lock nut. I understand that the same thing will happen to you with the bora ultra.

En principio no creo que sea compatible. En mi caso lo he adaptado a unas ruedas Campagnolo bora one con la intención de cambiar el núcleo de acero que tenían.Además he tenido que comprar un nuevo eje y una tuerca de cierre. Entiendo que te va a ocurrir lo mismo con las bora ultra.

Answer of NOZOMI

I think that Campagnolo ZONDA G3 C15 will fit.

Campagnolo ZONDA G3 C15 であれば適合するかと思います。

Answer of ANGEL

Yes, but you will also have to put a new core shaft.

Si, pero tendrás que poner también un eje del núcleo nuevo.

Answer of NOZOMI

I´m using Shimano 12 speed on my Campagnolo Bora WTO 45 and it works fine. Not compatible with BORA WTO 33 DB. WTO33 and WTO45 have the same structure, so I think they can be used. Also, the spacer (FH-RE216) is sold separately for this product, but you will need it if you do not have it.

Campagnolo Bora WTO 45にShimano 12 スピードを使ってますが問題なく使用しています。BORA WTO 33 DBには非対応です。 WTO33とWTO45は構造は同じなので使えると思います。 あとこの商品にはスペーサー（FHーRE216）が別売りになってますの持っていない場合は必要になります。

Answer of Carsten

Yes it is correct . It is the correct replacement for your free hub.

Yes it is correct . It is the correct replacement for your free hub.

Answer of Leslie

I installed it on my Campagnolo Shamal Ultra c17, so I don’t know the answer to your question. I would think so but I’m guessing.

I installed it on my Campagnolo Shamal Ultra c17, so I don’t know the answer to your question. I would think so but I’m guessing.

Hello This hub is compatible with Fulcrum wheels. Regards

Hello This hub is compatible with Fulcrum wheels. Regards

Hello, this hub cassette is not compatible with Elite Direto X rollers. Regards.

Hola, este cassette de cubo no es compatible con los rodillos Elite Direto X. Saludos.

Hello, this will be a good option. Regards.

Hola, esta será una buena opción. Saludos.