Shimano RT-CL800 Lock Externo brake disc

Answer of FCO. JAVIER

The discs are the same, one threads with a nut that is tightened with the cassette key and the other with the hollowtech key.

Los discos son iguales, uno rosca con una tuerca que aprieta con la llave de cassette y otro con la llave del hollowtech.

Answer of ANTONIO

Center lock, which means that it closes with a central nut. There are two types of nuts: the rear one that threads internally and the front one that closes with an external nut. The disc is the same at the rear as at the front. Change the tightening nut. It is important to know where you are going to mount the disc. Front, external thread and rear, internal thread. These discs work great for me although they are more expensive.

Center lock, quiere decir que cierra con tuerca central. Hay dos tipos de tuercas la trasera que rosca interiormente y la delantera que cierra con tuerca exterior. El disco es igual el trasero que el delantero. Cambia la tuerca de apriete. Es importante saber donde vas a montar el disco. Delante, rosca exterior y trasera rosca interior. Estos discos a mí me van de maravilla aunque son mas caros.

Answer of Egidijus

These are the brake pads to match yours discs: Shimano L05A-RF Resin Ice-Tec Disc Brake Pads

These are the brake pads to match yours discs: Shimano L05A-RF Resin Ice-Tec Disc Brake Pads

Answer of Fortunato

Shimano B05S-RX brake pads; the key to tighten the discs I recommend this Shimano Unior Integrated Bottom Bracket Tool

Pastiglie freno Shimano B05S-RX; la chiave per serrare i dischi ti consiglio questa Unior Integrato Strumento Movimento Centrale Shimano

Answer of Markus

L05A-RF Resin Ice-Tec disc brake pads

L05A-RF Resin Ice-Tec Scheibenbremsbeläge

Answer of Manuel

For external nuts the tool to use is the same as a bottom bracket wrench. Shimano TL-FC32 or its equivalent would work. You can use either resin or metal pads with these rotors but you need to check the type of pads you require first.

For external nuts the tool to use is the same as a bottom bracket wrench. Shimano TL-FC32 or its equivalent would work. You can use either resin or metal pads with these rotors but you need to check the type of pads you require first.

Answer of Egidijus

Yes it can replace as long as it has the same center lock hub

Yes it can replace as long as it has the same center lock hub

Answer of Markus

Hello. I am personally enthusiastic about it because the Shimano RT-CL800 is lighter than the Sm-rt 800, has better heat dissipation and does not warp on long descents like the Sm-rt 800. It is also a little less prone to wear and tear and with the right brake pads it has very strong braking power. So you can´t go wrong with it.

Hallo. Ich persönlich bin begeistert davon da die Shimano RT-CL800 gegenüber der Sm-rt 800 leichter ist, eine Bessere Wärmeabfuhr hat und diese bei langen Abfahrten sich nicht so verzieht Wie die Sm-rt 800. Auch ist diese ein wenig Verschleißärmer und mit den richtigen Bremsbelägen einfach eine sehr starke Bremsleistung hat. Kann man also nichts mit falsch machen

Answer of Benjamin

yes completely compatible, answering before I forgot to write, be careful if the closure has an internal ring (+thin) or external (+thick) you need to see/understand if the frame/fork has enough space for one ring or the other.

si completamente compatibili, rispondendo prima ho dimenticato di scrivere occhio se la chiusura ha la ghiera interna (+sottile ) o esterna (+spessa) bisogna vedere /capire se il telaio/forcella hanno abbastanza spazio x una o l´altra ghiera.

Answer of Jose david

Yes, they are very beautiful and elegant top-of-the-range records

Si ,son unos discos muy bonitos y elegantes tope gama

Answer of LLUIS

Yes, it comes in an envelope

Si , viene dentro de un sobre