Specialites TA Exterior chainring

Answer of Clas

It will fit on the FC-5800 crank. You do however need new bolts, as the original bolts for FC-5800 thread into the chainring.

It will fit on the FC-5800 crank. You do however need new bolts, as the original bolts for FC-5800 thread into the chainring.

Answer of hubert

Yes, it is possible to do this without any problem, no need to buy other screw kits. Great with this Cdt pedal set.

Oui possibilité de le faire sans problème, pas besoin d acheter d autres kit de vis. Super avec ce pédalier Cdt

Answer of Chris

Yes. It says so in the description although they leave off the "FC" on the 5800. Also, looking at wolf tooth chainring manufacturer website, their chainring is compatible across all the same Shimano models Dura Ace 9000, Ultegra 6800, 105 5800, RS510, Tiagra 4700 or 4703, Sora R3000 or R3030, and Claris R2000 or R2030, 105 R7000, Ultegra R8000, and Dura-Ace R9100

Yes. It says so in the description although they leave off the "FC" on the 5800. Also, looking at wolf tooth chainring manufacturer website, their chainring is compatible across all the same Shimano models Dura Ace 9000, Ultegra 6800, 105 5800, RS510, Tiagra 4700 or 4703, Sora R3000 or R3030, and Claris R2000 or R2030, 105 R7000, Ultegra R8000, and Dura-Ace R9100

Answer of Clas

Yes, it will fit on the FC-5800 crankset.

Yes, it will fit on the FC-5800 crankset.

Answer of Declan

If it is 110 bcd then yes, you might have to grind a bit of the corner off one off the arms like I did to get it to work on 9200

If it is 110 bcd then yes, you might have to grind a bit of the corner off one off the arms like I did to get it to work on 9200

Answer of Clas

No, the BCD is not the same on the FC-M8000.

No, the BCD is not the same on the FC-M8000.

Answer of Petteri

Bolts are not included. Needs space specials TA interiors set. See your suitable crank set.

Pultit eivät ole mukana. Tarvitsee tila specialites TA interiors setin. Katso sopiva kampisarjaasi.

Answer of Clas

No, FC-RX600 uses a different chainring construction where both chainrings are mounted on the inside of the bolt arms.

No, FC-RX600 uses a different chainring construction where both chainrings are mounted on the inside of the bolt arms.

Answer of Petteri

The original screws fit these strollers.

Alkuperäiset ruuvit sopivat näihin rattaisiin.

Answer of Adrian

I installed it on 105 r7000 cranks with a small 34T sprocket and the original bolts were ok.

Ja montowałem do korb 105 r7000 razem z małą zębatką 34T i oryginalne śruby były ok.

Answer of Petteri

Ultegra r8000 and Dura-Ace 9000

Ultegra r8000 and Dura-Ace 9000

Answer of Andrew

that´s fine, it will work, You just have to lift the deralier to its maximum and tighten the cable and it will work.

that´s fine, it will work, You just have to lift the deralier to its maximum and tighten the cable and it will work.

Answer of Andrew

I have the da 9100 crank. i used the specialites crank bolts and the normal da9100 derailer works perfectly

I have the da 9100 crank. i used the specialites crank bolts and the normal da9100 derailer works perfectly

Answer of Petteri

You need these to mount the R8000 crankset, which will mount the wheel correctly. Specialites TA Covers Series X110 Ultegra for your 8000 cam series. Then it fits well.

Tarvitset nämä R8000 kampisarjan kiinnitystä varten, jolla ratas kiinnittyy oikein. Specialites TA Kannet Sarja X110 Ultegra 8000 kamisarjaasi varten. Sitten istuu hyvin.