`Remember me on this computer` option

Select the `Remember me on this computer` option if you wish to be automatically logged on to the computer in future. Your account will remain active for 45 days. Please do not use the `Remember me` option if using a computer with public access or that is used by more than one person.

Seller information

Sold and shipped by

Return of order

Albatross Alba Combi Nmea2000 Converter

Albatross Alba Combi Nmea2000 Converter

Albatross Alba Combi Nmea2000 Converter

Albatross Alba Combi Nmea2000 Converter


Albatross Alba Combi Nmea2000 Converter

View more related products to:

Product description Albatross Alba Combi Nmea2000 Converter

Alba-Combi Engine Monitoring 15 PGN - Analog to NMEA 2000 Signal Converter.

Translate analogue signals from all over the boat to an NMEA2000 ®.


- NMEA 2000 Certified Product
The unit was recognized officially by NME2000®

The new AlbaCombi is a second generation device, built following our successful Alba line of converters, that translate analogue signals from all over the boat to an NMEA2000 bus. The AlbaCombi can be used to get engine data, tank levels, alarm status, generic pressure and temperature indications from any 4-20mA sensor.

- Configuration and setup from PC and without any calibration tools
The AlbaCombi has an Ethernet port that will allow web based calibration. Just connect your laptop to the AlbaCombi via Ethernet and you will get to the calibration and testing page. No calibration tools or special interfaces are required. This device is future proof and can be upgraded in the field via its Ethernet port.

- Monitor all boat parameters anytime anywhere
With AlbaCombi you can monitor engine data, tank levels, alarm status, generic pressure and temperature not only from any multifunction display but also from any smartphone or personal device with an Internet connection.

- Customize your monitoring interface
The Alba-Combi has an embedded monitoring web server that will allow to create a full monitoring display with analogue or digital gauges to be displayed in PC, Mac, iOS or Android devices. Whether it’s onboard via WiFi or ashore via an Internet connection, you can see what is happening aboard your vessel.

- Powerful
With the AlbaCombi you get twelve 0V to 32V inputs that can be used for anything from reading voltages of batteries to interfacing with any analogue gauges. Six channels can be configured to measure resistance from any industry standard engine sensor. Also there are two RPM inputs, one PTC temperature input, one shunt and two relay outputs.

- Precise
All twelve resistance and voltage channels have comprehensive calibration that allow you to create an 8 point calibration table or select a predefined industry standard calibration table for most common sensors and gauges.

- Capable
Satisfy the most demanding applications. The isolated NMEA2000 port will feed all the converted data into a NMEA2000 network.

- Versatile
The AlbaCombi can be used to get engine data, tank levels, generic pressure and temperature from any resistive, voltage or 4-20mA sensor (additional resistor needed)


- Tension: .......................9-18V DC from the NMEA2000 bus
- Consumption................150mA
- Equivalent load.............3 LEN as per NMEA2000
- Size...............................104mmx86mmx588mm
- Weight...........................230g
- Mounting.......................DIN Rail Clip EN 50.022
- Case material...............Top PC/UL 94-V0, Base PPO/UL 94-V0
- Protection Class...........IP20
- Working temperature....-15ºC to +55ºC
- Storage temperature.....-25ºC to +85ºC
- Analogue Inputs:
6 x Resistive (0 to 600 Ohm) or Voltage (0-32V)
6 x Voltage (0-32V)
2 x RPM W signal or magnetic sensor
1 x Precision temperature PTC1000
1 x 100Mv current Shunt
- Analogue Input precision...... 1% or better
- Relay out.............................. 2 x Open collector output
- Data in/out:
Ethernet port (calibration and monitoring)
RS232 (module programming)
Isolated CAN NMEA2000
- Periodic:
PGN 127488 - Engine Parameters, Rapid Update
PGN 127489 - Engine Parameters, Dynamic
PGN 127493 - Transmission Parameters, Dynamic
PGN 127505 - Fluid Level
PGN 127508 - Battery Status
PGN 130314 - Pressure
PGN 130316 - Temperature, Extended Range
PGN 130576 - Trim Tab Status

Instructions of use:

The problem appears when you put the unit in setup mode (Switch nº2 in OFF position) in Chrome browser.

How to recover the unit:

First of all, install Mozilla Firefox.

Connect the unit to your computer and confirm the ip configuration is correct.

1) Get inside in Firefox browser in the url:

2) Confirm unit is in setup mode
Switch nº1: ON
Switch nº2: OFF

And press RESET button

3) In Firefox, press button update the firmware. You should download from the following link:


4) Decompress the .zip and press browse button in Chrome, select the file ended in .xin and Upload.

5) Press Upload, wait around 10 seconds and wait to receive the upload confirmation message: Firmware upload succeeded

6) Turn both switches in ON position
Switch nº1: ON
Switch nº2: ON

And press RESET button

7) Refresh Firefox browser and wait some seconds the unit should work again.

With the unit recovered and both switches ON the unit works in Firefox and Chrome. But in setup mode only works in Firefox.

Albatross Alba Combi Nmea2000 Converter is a product that corresponds to the Converters category within Electronics selection at your nautical and fishing store, waveinn. Wait no more and learn about all the advantages belonging to the community of waveinn. What are the advantages of Albatross Alba Combi Nmea2000 Converter? This product is designed specifically to provide good support and entirely based on our passion for nautical and fishing.

Features Albatross Alba Combi Nmea2000 Converter


Write a review about this product and earn CoINNs coinns



It arrived safely in about a week. I was worried because I was from overseas, but there is a sense of security because it can be confirmed with a tracking system that can be confirmed in detail. Unfortunately, the packaging was a bit messy and the contents were out of the cushion when it arrived. There was no damage, but if it was damaged, it would be a worrying problem for Japanese people because it would have to communicate with a foreign shop in a foreign language

Write or ask a question to our team of experts

Product rating

Your feedback is important to us, your review about this product will be revised by our experts and will be published within 5 working days. Please make sure that your review focus on the product and your experience with it, this will help other customers make more confident decisions. For any issues with an order, please contact us.

I have read and accept the conditions contained in the Privacy Policy on processing of my data to manage my query or request

Related products

clouse menu Close
up up