Elegoo Rapid PLA + (PLUS) PLA-filament

ELEGOO Rapid PLA + (PLUS) Filament, in Yellow, smooth feeding and no jams, as well as being resistant.

1.75 mm Filament.
-Dimensional accuracy: 0.02 mm.
-1 Kg Spool.
-Resistant and high impact resistance.
-High adhesion rate.
-Extrusion and nozzle temperature of 205 to 230 ºC.
-Recommended Hotend temperature of 50 to 65ºC.

The ELEGOO Rapid PLA+ (PLUS) filament is a 1.75 mm model, which has a high precision of 0.02 mm.

In addition, it will feed the printer smoothly and without jams.

This filament has a high tensile strength (X-Y) and a high Charpy impact resistance.

It is more difficult to break, since it has a higher elongation at break and flexural strength.

It is available in Yellow color.

Well-wound spool with built-in gauges.

The 1 Kg spool of ELEGOO Rapid PLA + (PLUS) filament has automatic winding and strict manual inspection, which results in fewer tangles.

And with its marked gauge on the spool, it will show the percentage of material and the approximate remaining length.

Supports high extrusion temperatures.

The ELEGOO Rapid PLA + (PLUS) supports very high temperatures, since it supports a recommended extrusion and nozzle temperature of 205 to 230ºC, and a recommended hotbed temperature of 50 to 65ºC.

Technical specifications ELEGOO Rapid PLA + (PLUS) Filament.
-1.75mm.
-High speed printing up to 600mm/s.
-1kg Spool Yellow Color.
-Compatible with FDM 3D printers:.

Brand: ELEGOO.

Model: Rapid PLA + (PLUS).

Extrusion/Nozzle Temperature: 200-230°C .

Recommended hotband temperature: 40-60°C.

Dimensional accuracy with a 99% probability: +/- 0.02mm.

Printing speed: 30~600 mm/s.

Printing layer thickness: 0.2mm.

Recommended platform: Glass/Fiberglass board/PEI + PVP glue stick or platform spray.

Net weight: 1 kg.

1 x ELEGOO Rapid PLA + (PLUS) Filament.
-1.75mm.
-High speed printing up to 600mm/s.
-1kg Spool Yellow Color.
-Compatible with FDM 3D printers.